Case study · Australia · Commissioned October 2026

An Australian spiral duct maker: a new SBTF-1602 spiral tubeformer, installed and making duct

Our customer designs and manufactures commercial ductwork in Australia. In 2026 they added a Taokron SBTF-1602 spiral tubeformer to their round duct production. Our team installed and commissioned it on site, and their operators were making spiral duct, from small branch sizes up to large mains, before we left.

Customer and Taokron crew in front of the new SBTF-1602 spiral tubeformer
Install done: their crew and ours with the new SBTF-1602, its decoiler and the first spiral duct.

At a glance

CustomerCommercial ductwork manufacturer
SiteAustralia
CommissionedOctober 2026
MachineSpiral Tubeformer SBTF-1602 with decoiler and run-out table
Duct rangeΦ80 to Φ1600 mm round spiral duct; galvanised steel 0.4 to 1.3 mm
Our partMachine, shipping, customs clearance and delivery to the door, on-site installation, commissioning and operator training

The machine

The SBTF-1602 forms continuous round spiral duct from coil. A patented flying slitter cuts each length while the tube keeps running, so the machine does not stop between pieces. One frame covers everything from Φ80 mm branch duct up to Φ1600 mm mains by changing the forming head, and it runs galvanised steel, stainless and aluminium. Full specifications are on the SBTF-1602 page.

Large and small diameter spiral duct coming off the SBTF-1602 at an Australian spiral duct maker
Large mains and small branch duct from the same machine, on the run-out table.

The install

We delivered door to door on DDU terms, so they did not have to deal with the shipping line or customs. On site our team set the decoiler, levelled the mainframe and run-out table, connected power and cooling, then set up and tested the forming heads one diameter at a time.

The SBTF-1602 forming large-diameter spiral duct on the an Australian spiral duct maker floor.

Training was easy, because they already had an experienced spiral operator. He had been running their older spiral machine for years, and he knew the process so well that he showed our own team a few tricks of his own. Machines are only half of a duct shop. The people running them are the other half, and this shop has good ones.

Customer operators working on the SBTF-1602 spiral head with a Taokron engineer
Their operators at the forming head with our engineer during commissioning.

More photos and video from site

Why a second spiral machine pays

Round spiral duct is quick to make and quick to install, and commercial jobs keep asking for more of it. A shop with one older spiral machine running flat out has two choices: send work out, or add capacity. A second tubeformer also means a breakdown on one machine no longer stops round duct output for the whole shop.

Thank you

Thank you to their manufacturing manager for organising the flights, accommodation and transport for our team, to their maintenance manager, who helped us from start to finish, and to everyone on the floor, especially their spiral operator for sharing his know-how.

Related

12-hour reply

Adding spiral duct capacity? Tell us the diameters and material thickness you make, and we will send back a machine recommendation and a quotation within 12 hours. Ask for the full SBTF-1602 running video too.

Request a quote