Rolling, welding and cutting for metal fabricators
Welding and Cutting Automation Machines
Seam, flange and elbow welders, robot welding cells for duct flanges, fans and structures, plate rolling and flanging machines, and laser cutting from coil, profile and 3D parts. Each machine is configured to your parts.
Overview
These machines take over the repetitive welds and cuts in a fabrication shop: the longitudinal and round seams on cylinders and duct, flanges on duct and pipe, segmented elbows, fan impellers and volutes, screw conveyor flights and brackets, plus the rolling, flanging and laser cutting that come before the weld. Most are set up by entering part dimensions on a touch screen; the robot cells find the seam with vision or laser tracking.
Taokron supplies HVAC duct machinery, roll forming lines, leveling and embossing machines and now this welding and cutting range. Ryan Tao in Melbourne is your contact from the first question to after-sales. Specifications on each page come from our machine catalogue. Where the catalogue gives no figure, or two different ones, we say so and confirm it on the quotation.
Some duct-shop machines are already in our duct range and are not repeated here: Automatic Stitchwelder SB-ZF1500, Hydraulic Rolling Machine SBJY-1500B, Round Tube Flanging Machine SBSF-1525, Four Gun Angle Iron Flange Welding Machine SB-FS1535L.
Cylinder forming and flanging
Round Duct Rolling and Welding Line
Coil-fed line for round duct and cylinders, 1 to 3 mm, diameter up to 1500 mm
Four-Roll Plate Rolling Machines
Hydraulic and full-servo four-roll rolling, up to 6 mm and 1500 mm wide
Cylinder Flanging and Punching Machine
Turns a 30 to 50 mm flange and punches bolt holes, diameter 400 to 1500 mm
Seam, flange and elbow welding
Straight Seam Welders for Round and Square Duct
Vertical round and square duct seam welder, laser-tracking cylinder welder
Circumferential Seam and Flange Welders
Girth seams and flange-to-duct welds, diameter up to 3500 mm
Robot Laser Welding Cell for Duct Flanges
Six-axis robot on a track, laser welds duct flanges with vision seam finding
Pipe Flange and Tee Welding Machines
Flange-to-pipe, elbow flange and tee welding, DN50 to DN600
Segmented Elbow Welding Machines
Welds segmented (lobster-back) elbows, sheet 1-5 mm and heavy 5-10 mm
Vision Flange Fastening Machine for Duct
Fixes angle flanges to rectangular duct with M4.2 fasteners, vision guided
Fan and screw conveyor welding
Fan Impeller and Volute Welding Machines
Robot welding for centrifugal and axial impellers, double-torch volute welder
Screw Conveyor Flight Welding Machine
Welds screw conveyor flights to the shaft and girth seams with two torches
Structural welding and angle steel
Gantry and Support Welding Robots
14 m gantry with laser tracking, robot cell for channel and angle supports
CNC Angle Steel Punching Line
Punches rivet holes and slots and chamfers corners in angle steel, 6 m feed
Laser cutting
Coil-Fed Laser Cutting Line for Duct
Decoiler, leveler and fiber laser cutting duct parts straight from coil
Structural Profile Laser Cutting Machine
Laser cutting and coping of channel, I-beam and angle steel
3D Five-Axis and Rotary Laser Cutting
Five-axis laser for formed parts, rotary laser for spun domes and shades
Specifications at a glance
Factory figures. Open a machine for the full tables.
| Machine | Size range | Thickness |
|---|---|---|
| Round Duct Rolling and Welding Line | Diameter 300 to 1500 mm | 1 to 3 mm |
| Four-Roll Plate Rolling Machines | Up to 1500 mm wide, minimum diameter 300 mm (hydraulic) | Up to 6 mm carbon steel |
| Cylinder Flanging and Punching Machine | Diameter 400 to 1500 mm, flange 30 to 50 mm | Stainless 0.8 to 3 mm, carbon steel up to 5 mm |
| Straight Seam Welders for Round and Square Duct | Round 250 to 1600 mm, square from 220 x 220 mm, 1500 mm long | 0.8 to 3.0 mm |
| Circumferential Seam and Flange Welders | Up to 2000 mm (limit 3500 mm) | Stainless 0.8 to 4 mm; up to 10 mm on large duct |
| Robot Laser Welding Cell for Duct Flanges | 200 x 200 to 1500 x 2000 mm | 0.6 to 2 mm |
| Pipe Flange and Tee Welding Machines | DN50 to DN600; tees 28 to 210 mm | Pipe wall 2 to 15 mm |
| Segmented Elbow Welding Machines | Diameter 108 to 800 mm | 1 to 10 mm |
| Vision Flange Fastening Machine for Duct | Duct up to 3000 x 1500 mm | 1.5 mm galvanized |
| Fan Impeller and Volute Welding Machines | Impellers 300 to 1600 mm; axial size 3 to 16 | Blades 1.5 to 6 mm |
| Screw Conveyor Flight Welding Machine | To order | Carbon steel |
| Gantry and Support Welding Robots | Gantry 5500 x 14000 mm; supports 500 to 1000 mm | Base plates 4 to 8 mm |
| CNC Angle Steel Punching Line | 6000 mm feed | 3#, 4#, 5# angle |
| Coil-Fed Laser Cutting Line for Duct | 4000 x 1500 mm, from coil | Leveler up to 2 mm stainless |
| Structural Profile Laser Cutting Machine | Channel 8 to 36, I-beam 5 to 36, angle to 200 x 200 | Per profile |
| 3D Five-Axis and Rotary Laser Cutting | 500 x 500 x 250 mm; rotary 100 to 600 mm | Under 3 mm; under 1.5 mm |
How an order works
- You send the parts you make, the material and thickness, the size range, your output and site power supply. Drawings or photos help.
- We send back a configuration, lead time and price.
- After the order and deposit, the machine is built to your configuration. Lead time depends on the configuration and is confirmed at quotation.
- The machine ships by container. Remote support included; on-site installation engineer available on request, quoted per order. Warranty terms are confirmed at quotation.
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Lead time is not published for these machines. It depends on the configuration and is confirmed at quotation.
Warranty. Warranty terms are confirmed at quotation.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed at quotation for each machine.
Price. Each machine is configured to your parts, material and output, so there is no list price. Send your details and we quote that machine.
Frequently asked questions
Who supplies these machines?
Taokron supplies them as part of its range. From Melbourne we handle inquiries, specification review, quotation, pre-shipment inspection, shipping and after-sales support, so you have one contact from the first question to commissioning.
Are these the same as your duct machines?
No. These are welding, rolling and cutting machines for cylinders, fans, pipe, structures and duct fabrication. Some duct-shop machines (horizontal seam welder, two-roll rolling machine, round tube flanging machine, four-gun angle flange welder) are in our duct machine range and are linked from this page.
Do they need programming?
Most are set up by entering the part dimensions on a touch screen. The robot cells for duct flanges, gantry work and elbows find the seam with vision or laser tracking; the support welding cell uses teach programming.
What lead time and warranty apply?
Neither is published for these machines. Both are confirmed in the quotation for your configuration.
Are they CE marked?
CE marking is confirmed at quotation for each machine.
Why are there no prices on the site?
Each machine is configured to your parts, material and output. Send your details and we quote that machine within 12 hours.
Price request
Ask for a quotation on this machine
Send the parts you make, the material and thickness, the size range and your output. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Welding or cutting machine
Several machines or a complete line? Use the full inquiry form