Coil-Fed Fiber Laser Cutting Line for Air Duct, 4000 x 1500 mm
Decoiler, 11-roll leveler and fiber laser with duct nesting software, 1500 W or 3000 W
Overview
What it does
Instead of loading cut sheets, this laser cuts duct parts straight from the coil. The coil is uncoiled, flattened in an 11-roll leveler and fed onto a 4000 x 1500 mm cutting bed, where the fiber laser cuts the nested layout.
When a layout is finished, the leveler feeds the next length and pushes the cut parts on to the receiving table, and the system starts the next layout. Loading and cutting overlap, which is where the time is saved.
The line comes with nesting software made for air duct parts. It is about 20 m long and 3.5 m wide, and the coil rack holds two coils of up to 8 t each.
Questions before you quote?
Send photos or drawings of your parts and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- 1500 W or 3000 W laser
- Coil width
- Receiving table and part sorting
What we need from you to quote
- Materials, thicknesses and coil widths
- Duct parts you cut today (fittings, panels, flanges)
- Monthly tonnage
- Site power supply and floor space (about 20 x 3.5 m)
Related machines in our duct range
- Laser Cutting Machine SBLC-4015: flat-bed fiber laser, 1500 x 4000 mm
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Lead time is not published for these machines. It depends on the configuration and is confirmed at quotation.
Warranty. Warranty terms are confirmed at quotation.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed at quotation for each machine.
Price. Each machine is configured to your parts, material and output, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send the parts you make, the material and thickness, the size range and your output. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Coil-Fed Fiber Laser Cutting Line for Air Duct, 4000 x 1500 mm
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Why cut from coil instead of sheet?
Coil is usually cheaper per tonne than cut sheet, there is no sheet loading, and the leveler feeds the next length while parts are unloaded.
What thickness can it cut?
The leveler is rated for stainless steel up to 2 mm. Cutting thickness depends on the laser power; tell us your materials and we confirm it.
Do you have a flat-bed laser as well?
Yes. The SBLC-4015 flat-bed fiber laser is in our duct machine range.
What lead time and warranty apply?
Lead time and warranty for this machine are confirmed in the quotation for your configuration.
Is the machine CE marked?
CE marking is confirmed at quotation. Tell us the destination country and we check what documents come with the machine.
Welding and cutting automation
