Laser Cutting Machine for Channel, I-Beam and Angle Steel
Cuts and copes channel 8 to 36, I-beam 5 to 36 and angle up to 200 x 200, with common-edge cutting
Overview
What it does
This machine laser-cuts structural profiles: lengths, mitres, copes, holes and slots in channel, I-beam and angle steel, which would otherwise mean sawing, drilling and torch work.
The operator picks the profile type and the cutting features from the screen instead of drawing or programming each part. Cutting parameters can be set for each feature, and common-edge cutting shares one cut between neighbouring parts to save material.
It takes channel from size 8 to 36, I-beam from 5 to 36, equal angle from 50 x 50 to 200 x 200 and unequal angle from 56 x 36 to 200 x 125.
Questions before you quote?
Send photos or drawings of your parts and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Laser power (to be agreed at quotation)
- Infeed and outfeed length
- Profile range
What we need from you to quote
- Profiles and sizes you cut
- Lengths and typical features (copes, holes, slots)
- Tonnes per month
- Site power supply
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Lead time is not published for these machines. It depends on the configuration and is confirmed at quotation.
Warranty. Warranty terms are confirmed at quotation.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed at quotation for each machine.
Price. Each machine is configured to your parts, material and output, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send the parts you make, the material and thickness, the size range and your output. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Laser Cutting Machine for Channel, I-Beam and Angle Steel
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Does the operator need CAD drawings?
No. The profile type and cutting features are selected on the screen, and parameters can be set per feature.
What profile sizes does it take?
Channel 8 to 36, I-beam 5 to 36, equal angle 50 x 50 to 200 x 200 and unequal angle 56 x 36 to 200 x 125.
What laser power does it use?
The laser power is not published; it is agreed with you at quotation according to your profiles and wall thickness.
What lead time and warranty apply?
Lead time and warranty for this machine are confirmed in the quotation for your configuration.
Is the machine CE marked?
CE marking is confirmed at quotation. Tell us the destination country and we check what documents come with the machine.
Welding and cutting automation
