Robot Laser Welding Cell for Rectangular Duct Flanges, 0.6 to 2 mm
Six-axis robot on a floor track with vision seam finding, two stations, stainless and galvanized duct
Overview
What it does
A six-axis robot runs on a floor track beside two work stations. The operator places a duct section and its flange, the vision system scans the joint with a laser line, and the robot generates its own welding path and welds the flange to the duct by laser, both horizontal and vertical seams.
While the robot welds on one station, the operator unloads and loads the other. No teaching is needed for each new size: the job is entered as parameters on the touch screen.
It takes stainless steel and galvanized duct 0.6 to 2 mm thick, from 200 x 200 mm to 1500 x 2000 mm in section and up to 1250 mm high. Laser welding keeps heat input and distortion low, which matters on thin stainless and on galvanized coating.
Questions before you quote?
Send photos or drawings of your parts and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Track length and number of stations
- Laser source power (to be agreed at quotation)
- Fixtures for your flange profile
What we need from you to quote
- Duct sizes, thickness and material
- Flange type and how it sits on the duct (a drawing or photo)
- Number of flanged sections per shift
- Site power supply
Related machines in our duct range
- Four Gun Angle Iron Flange Welding Machine SB-FS1535L: welds angle iron flange frames for rectangular duct
- Handheld Laser Welding Machine: manual laser welding for duct and fittings
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Lead time is not published for these machines. It depends on the configuration and is confirmed at quotation.
Warranty. Warranty terms are confirmed at quotation.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed at quotation for each machine.
Price. Each machine is configured to your parts, material and output, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send the parts you make, the material and thickness, the size range and your output. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Robot Laser Welding Cell for Rectangular Duct Flanges, 0.6 to 2 mm
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Does it need programming for each duct size?
No teaching is needed. You enter the size as parameters and the vision system finds the joint and generates the welding path.
What does the operator do?
Positions the duct and flange, loads and unloads. The cell has two stations, so loading happens while the robot welds.
Can it weld galvanized duct?
Yes, stainless steel and galvanized sheet from 0.6 to 2 mm are listed.
What lead time and warranty apply?
Lead time and warranty for this machine are confirmed in the quotation for your configuration.
Is the machine CE marked?
CE marking is confirmed at quotation. Tell us the destination country and we check what documents come with the machine.
Welding and cutting automation
