Cabin Air Units for Ship Accommodation
Attenuator box and diffuser for marine ceilings, with or without electric re-heat

Overview
What it is for
A cabin unit is the air terminal of a ship's accommodation air conditioning. It supplies conditioned air to cabins, mess rooms, hospitals and meeting rooms. Each unit is an attenuator box above the ceiling with a diffuser below it, designed for marine B-15 ceilings.
The box is lined with rock wool for sound attenuation and fire insulation. The casing is AluZinc steel, galvanised steel or stainless steel. Two sizes cover most rooms: 250 m³/h and 350 m³/h maximum air flow.
Every unit has a damper in the air inlet, so the air flow is set at commissioning, and a knob in the diffuser lets the person in the room adjust it. Re-heat versions carry a 230 V electric heater of 800 W or 1200 W, controlled by a room thermostat, with a manual and an automatic over-heat switch.
Make it yourself or buy it finished? If you run your own round duct, our SBTF-1602 spiral tubeformer and SBEM-1250 elbow machine make spiral pipe and bends in house. Many shops do both: make the high-volume sizes and buy the awkward fittings finished. See also how duct fittings are made.
Questions before you send the list?
Send a photo of the drawing schedule or the fitting you need and we tell you what to put on the take-off.
Ask on WhatsAppIn this range
- Cabin units, 250 m³/h, no re-heat
- Cabin units, 250 m³/h, 800 W or 1200 W re-heat
- Cabin units, 350 m³/h, with or without re-heat
- Diffusers and inlet dampers
- Room thermostats for re-heat units
What we need from you to quote
- Your take-off or bill of materials (Excel, PDF or a photo of the drawing schedule is fine)
- Item, diameter and quantity for each line
- Sheet thickness, or the standard you build to, and the zinc coating (Z80 or Z275)
- Seal type: rubber-sealed or plain ends
- Delivery port, and whether the fittings ship on their own or with a machine order
Supply terms
Who supplies them. Taokron. We handle the take-off review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time depends on the item mix and quantity and is confirmed at quotation. As a guide, a recent mixed order of about 1,900 bends and dampers was produced in 50 working days.
Shipping. FOB or delivered to your port, quoted per order. Fittings can ship on their own or share a container with a machine order.
Price. No price list. Every line is quoted from your take-off, by diameter, gauge, coating and quantity.
About cabin air units
Which size do I need?
250 m³/h covers a typical single cabin; 350 m³/h suits larger rooms. Send the room list with the design air flow and we match the unit per room.
Is there a version with heating?
Yes. Re-heat units carry an 800 W or 1200 W electric heater at 230 V, controlled by a room thermostat, with manual and automatic over-heat protection.
How long does production take?
Production time depends on the item mix and quantity and is confirmed at quotation. As a guide, a recent mixed order of about 1,900 bends and dampers was produced in 50 working days.
Do you have a price list?
No. Fittings are quoted per order from your take-off, because the price depends on the diameter, gauge, coating and quantity of each line. Send the list and we quote every line.
Request for quotation
Send your take-off for a quotation
Paste your take-off or bill of materials below: item, diameter, quantity, gauge and coating for each line, plus your delivery port. Ryan Tao replies within 12 hours. Excel or PDF lists can go to [email protected] or WhatsApp +61 435 074 994.
Quotation for: Cabin Air Units
Need a machine as well? Use the full inquiry form


