Insights · Market guide

HVAC Duct Fabrication in Greece 2026: Market, Standards and Machines

Greek ductwork demand is concentrated in Attica, around Athens and its new data centre sites, with a second pull from the hotel belt on the islands and Crete and a smaller base in Thessaloniki. This guide is for duct shop owners and HVAC contractors in Greece who are deciding whether to add capacity or automate. It covers where the work is coming from in 2026, the European standards and KENAK rules around ductwork, the VAT, customs and CE questions to settle before you order a machine, the 230/400 V 50 Hz supply, and the machine set-ups that fit typical Greek shops, rectangular duct first.

Why Greece in 2026

Four kinds of project are keeping Greek HVAC contractors busy: data centres in Attica, hotel building and renovation, large urban redevelopment such as the Ellinikon, and hospital and public work. None of them depends on a single event, which makes the demand steadier than a one-off megaproject. Two cautions apply: several of these figures come from press reports and company statements, and timelines in Greece often slip, so treat each one as a lead to follow, not a guaranteed order book.

Data centres in Attica

Greece's grid operator ADMIE has seen data centre connection requests rise from 1.2 GW at the end of 2025 to nearly 5 GW, according to a September 2026 report, and a November 2026 report put requests above 12 GW with only about 517 MW under signed agreements or final connection offers, while the Environment and Energy Ministry is drafting a framework to separate serious projects from speculative ones. Named projects around Athens include Microsoft's reported investment of about EUR 976 million in three data centres at Spata and Koropi, Digital Realty's Athens-3 site at Koropi (6.8 MW), Data4's first Greek campus at Paiania, and a 12.5 MW facility planned by DEI and EDGNEX at Spata. White space is often cooled by room or in-row units with little ductwork, but electrical rooms, battery rooms, generator halls, offices and smoke extract all need sheet metal. Our data centre duct manufacturing guide covers the details.

Hotels and tourism

The Institute for Tourism Research and Forecasts (ITEP) reported in July 2026 that capital investment in Greek hotels reached about EUR 1.5 billion in 2025, up from EUR 1.0 billion in 2024, across a stock of 10,118 hotels and 450,565 rooms. New branded resorts and city hotels open each season in Athens, Crete and the islands, and the older stock keeps being renovated. Hotels are ductwork-heavy: guest room fresh air, kitchen extract, spa and pool dehumidification, plant rooms and car parks. Many of these projects are on islands, so a shop on the mainland or in Crete that can deliver finished duct to a ferry on time has an advantage.

Ellinikon and urban redevelopment

The Ellinikon, the former Athens airport site on the southern coast, is Greece's largest urban redevelopment. Lamda Development told analysts in July 2026 that cumulative investment would reach about EUR 1.6 billion by the end of 2026, that Riviera Tower construction is due to finish between late 2026 and early 2027, that the first homes are due for handover in 2027, and that Riviera Galleria should open in the second half of 2027 with the larger Ellinikon Mall now under construction. Towers, retail and offices on that scale mean years of HVAC work for contractors in the Athens basin.

Hospitals and public buildings

Greece's EU Recovery and Resilience Facility plan is worth about EUR 35.95 billion, and by March 2026 the Commission had disbursed 68.5% of it, with the remaining milestones due by 31 August 2026, the final payment request due by 30 September 2026 and the facility ending in 2026. That means some RRF-funded refurbishment, including health sector and energy upgrade work, is in its closing phase, and the funding behind it will taper. Beyond the RRF, the Stavros Niarchos Foundation is funding new hospitals, with the University Pediatric Hospital of Thessaloniki targeted for 2027, and a public-private partnership for a new cancer hospital in Thessaloniki has been moving through procurement. Operating theatres, isolation rooms and laboratories need tightly sealed, often stainless ductwork; see our cleanroom duct guide and galvanised vs stainless comparison.

Standards and codes for ductwork in Greece

As an EU member Greece works with European standards, and Greek public and private specifications for sheet metal ductwork are normally drafted on them. In practice a Greek duct shop builds to what the mechanical engineer's specification names. We could not find a single Greek duct construction code, so check each specification.

  • EN 1505 and EN 1506: dimensions of rectangular and circular sheet metal air ducts, so that ducts and fittings from different makers fit together.
  • EN 1507: strength and leakage of rectangular sheet metal ducts, including the reinforcement and joint requirements that drive which flange system a shop uses. See our air leakage classes guide.
  • EN 12237: strength and leakage of circular sheet metal ducts, relevant to spiral duct. EN 15727 supplies the leakage classification and test method shared by these standards. Note that CEN is working on revising this set, so check the edition your specification cites.
  • KENAK and T.O.T.E.E. 20701: KENAK is the Greek Regulation on the Energy Performance of Buildings, issued in 2010 under Law 3661/2008, and the T.O.T.E.E. 20701 technical guidelines of the Technical Chamber of Greece carry its calculation parameters, climatic data and the inspection procedures for air conditioning installations. They drive energy performance rather than duct construction, but they push designers toward tighter, better insulated duct systems. The regulation has been revised since 2010, so confirm the current version with the Technical Chamber of Greece or the Ministry.
  • SMACNA and DW/144: on international hotel and data centre projects the design team may name these instead of or beside the EN documents. See our international duct standards comparison, gauge chart and hangers and supports guide.

Importing duct machinery into Greece

  • VAT: the standard Greek VAT rate is 24%. Import VAT is generally charged on the customs value plus duty, and a VAT registered business can normally recover it as input tax. Confirm the treatment for your machine and your company with your accountant, particularly if you are on one of the Aegean islands, where reduced VAT rates can apply.
  • Customs duty: machines of this kind usually fall under HS 8462 or 8463, and the duty depends on the full tariff code and the origin of the goods. Check with your broker; we do not quote a rate here.
  • CE marking: machinery placed on the EU market needs CE marking. Until 19 January 2027 the Machinery Directive 2006/42/EC applies, and from 20 January 2027 Regulation (EU) 2023/1230 applies directly in every member state. Taokron machines are CE marked with a Declaration of Conformity and ship with electrical diagrams and component lists. If your delivery is close to the changeover date, ask us which regime your documents follow.
  • Customs and shipping: use a licensed customs broker, and tell us the port nearest your workshop when you request a quotation. Piraeus is the main container port for Attica. Our importing guide covers the general paperwork.

Power supply: 230 V single phase, 400 V three phase, 50 Hz

Greece uses the European supply of 230 V at 50 Hz, with sockets of the Schuko type. Three phase workshops are normally supplied at 400 V between phases, but confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motors, drives and control transformer against your supply when we quote, so tell us your voltage at the start. See also duct machine voltage and frequency by country.

Typical Greek shop set-ups and the machines that fit

Contractor shop, rectangular duct for hotel and commercial fit-outs

Many Greek HVAC installers make their own duct in a small workshop. A practical set is the Rectangular Duct Line II SBAL-II, which handles 0.5 to 2.0 mm material at widths of 1250 or 1550 mm and a feeding speed of up to 18 m/min, or the Auto Duct Line SBAL-III, which adds hydraulic notching and shearing in the same 0.5 to 2.0 mm range at up to 18 m/min. Add a Pittsburgh lockformer (SBLC series), which forms Pittsburgh locks in 0.4 to 1.2 mm and snap locks in 0.7 to 1.5 mm, a TDF flange forming machine SBTDF for 0.5 to 1.2 mm or 0.8 to 1.5 mm with a 35 mm flange height, and a pneumatic folder SBWS. That covers straight duct, TDF joints and simple fittings with a small crew.

Volume shop for data centres, Ellinikon and hospitals

Shops chasing data centre and large tower packages need output and consistent quality over thousands of square metres. The Auto Duct Line SBAL-V is an automatic U-shape line that takes coil to finished panel in 0.5 to 1.5 mm at widths of 1250 or 1550 mm and 18 m/min, with TDF or angle flange forming built in. Behind it, the TDF duct zipper closes seams on 0.8 to 1.5 mm duct up to 1500 mm long, the hydraulic folder SBWS handles up to 2.0 mm on the 1500 mm model, and corner machines finish the flanges: the pneumatic corner mounting machine SBCC inserts corner pieces in material up to 1.5 mm, and the auto corner making machine produces the corner pieces at 40 to 120 pieces a minute. A Plasma Cutter SBPC1550 cuts fittings from nested drawings in 0.4 to 4 mm sheet on a 1550 mm wide table.

Round duct

Spiral duct suits exposed ceilings, car parks, warehouses, kitchen extract and industrial work. The Spiral Tubeformer SBTF-1500 makes diameters from 80 to 1500 mm in galvanised steel of 0.4 to 1.2 mm, and the SBTF-1602 goes to 1600 mm in galvanised steel or aluminium up to 1.3 mm. The Spiral Duct Flanging Machine SBFB-1600 turns flanges on round duct from 200 to 1600 mm. For a real example, see Kavanagh Industries in Sydney, which added an SBTF-1602 in October 2026.

Hospital and industrial work

For stainless extract and heavier round duct, the Automatic Stitchwelder SB-ZF1500 welds longitudinal seams on round duct of 0.8 to 3 mm in diameters of 150 to 1500 mm, covering the seams that a lock cannot. See our guide to spiral vs welded round duct.

Labour and space

The statutory minimum wage in Greece rose by EUR 40 to EUR 920 gross per month from 1 April 2026. Skilled sheet metal workers and operators earn more, and the government has signalled further rises, so check current figures with your payroll adviser. An auto duct line replaces much of the manual marking, cutting, notching and folding, so a small crew can supply several sites, which matters in a tight labour market.

Space is often the limit. The auto duct line is the longest item, with coil racks at one end and a run-out table at the other; the SBAL-V occupies 14,500 mm by 4,950 mm or 5,350 mm depending on width, while the SBAL-III mainframe is 2,300 mm long with a separate decoiler. Ask us for a layout drawing based on your building before you sign a lease, and leave room for coil deliveries, finished duct storage and truck loading. Industrial space is generally easier to find on the edges of the Athens basin and around Thessaloniki than in the centre, so check the options early. Our factory layout guide has worked examples.

Working with Taokron from Greece

  • Machines built since 1994 and supplied to 100+ countries, with 60+ patents, from an ISO 9001:2015 factory
  • CE marked with a Declaration of Conformity
  • Wired for your three phase 50 Hz supply
  • Installation and commissioning quoted per engineer-day
  • Replies within 12 hours by email at [email protected] or on WhatsApp at +61 435 074 994

Get a Greece-ready Taokron quotation →

FAQ

Which ductwork standards are used in Greece?

Greece is an EU member, so ductwork is normally specified on European standards: EN 1505 and EN 1506 for the dimensions of rectangular and circular sheet metal ducts, EN 1507 for the strength and leakage of rectangular ducts, EN 12237 for circular ducts, and EN 15727 for leakage classification. The building energy side is covered by KENAK, the Greek Regulation on the Energy Performance of Buildings, and its T.O.T.E.E. 20701 technical guidelines, which set energy calculation and inspection rules but are not a duct construction code. On international hotel and data centre jobs, design teams sometimes name SMACNA or DW/144 instead. Always build to the documents named in the project specification.

What voltage and frequency do duct machines need in Greece?

Greece uses the European supply of 230 V at 50 Hz. Three phase workshops are normally supplied at 400 V between phases, but please confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motor, drive and control wiring against your supply when we quote.

What taxes apply when importing duct machinery into Greece?

The standard Greek VAT rate is 24%. Import VAT is generally charged on the customs value plus any duty, and a VAT registered business can normally recover it as input tax, but confirm this with your accountant. Machines of this kind usually fall under HS 8462 or 8463, and the duty rate depends on the full tariff code, so ask your customs broker to classify the machine and confirm the rate before you budget.

Do duct machines sold into Greece need CE marking?

Yes. Machinery placed on the EU market must carry CE marking. Until 19 January 2027 that means the Machinery Directive 2006/42/EC, and from 20 January 2027 Regulation (EU) 2023/1230 applies. Taokron machines are CE marked with a Declaration of Conformity. If your delivery is close to that date, ask us which regime the documents for your machine follow.

Where is ductwork demand in Greece coming from in 2026?

The main sources are data centre projects in Attica around Spata, Koropi and Paiania, hotel building and renovation across Athens, the islands and Crete, the Ellinikon redevelopment in southern Athens, and hospital and public building work, some of it funded through the EU Recovery and Resilience Facility. Greek electrical grid operator ADMIE reported data centre connection requests rising from 1.2 GW at the end of 2025 to nearly 5 GW, although not every request will be built, and later reports put requests higher still.

Which machines should a new Greek duct shop start with?

A contractor shop making rectangular duct for hotels, offices and fit-outs usually starts with a rectangular duct line or auto duct line, a Pittsburgh lockformer, a TDF flange former and a folder. Add a duct zipper and corner machines as volume grows, a spiral tubeformer when round duct becomes regular work, and a plasma table for fittings. Send your duct sizes, gauges and monthly output and a Taokron engineer will propose a machine set within 12 hours.

12-hour reply

Setting up or upgrading a duct shop in Greece? A Taokron engineer replies within 12 hours.

Ask an engineer

Engineer reply

Ask an engineer about this guide

Describe your job and what you are trying to make. Ryan Tao replies within 12 hours.

Guide: HVAC Duct Fabrication in Greece 2026: Market, Standards and Machines

Not ready for a quote? Get the 2026 catalogue by email: 66 machines, one page each.

Machinery for this application

The duct fabrication workflows above run on standard Taokron equipment: spiral tubeformers for round duct, auto duct production lines for rectangular duct, and TDF flange and lockformer machines for closure, or browse the full machine catalog.