Bulkhead and Deck Penetration Sleeves for Ship Ventilation

Straight and L profile penetration sleeves, insulated versions, penetration transitions and joints for spiral duct on ships

Bulkhead and Deck Penetration Sleeves for Ship Ventilation
WhatsApp an engineerPrice, lead time and layout within 12 hours

Overview

What it is for

On a ship, every duct that passes through a bulkhead or a deck needs a sleeve that is welded into the steel and joined to the spiral duct on both sides. Penetration sleeves are made from Q235B steel and hot-dip galvanised, with mounting holes at both ends to fix the duct.

Straight sleeves go through flat bulkheads. L profile sleeves turn the duct through the penetration where space is tight, and their leg lengths are made to order. Insulated versions carry 15 mm rock wool (60 kg/m³) for fire and condensation zones.

Penetration transitions and long penetration transitions step the duct size at the sleeve, and male penetration joints connect the sleeve to the next fitting. For the shipyard, list the diameter, the sleeve length and the bulkhead type for each penetration.

Make it yourself or buy it finished? If you run your own round duct, our SBTF-1602 spiral tubeformer and SBEM-1250 elbow machine make spiral pipe and bends in house. Many shops do both: make the high-volume sizes and buy the awkward fittings finished. See also how duct fittings are made.

More photos

Questions before you send the list?

Send a photo of the drawing schedule or the fitting you need and we tell you what to put on the take-off.

Ask on WhatsApp

In this range

  • Straight penetration sleeves
  • Insulated penetration sleeves
  • L profile penetration sleeves
  • Insulated L profile penetration sleeves
  • Penetration transitions and long penetration transitions
  • Male penetration joints
  • Insulated spiral duct connectors (to insulated flexible hose)

What we need from you to quote

  • Your take-off or bill of materials (Excel, PDF or a photo of the drawing schedule is fine)
  • Item, diameter and quantity for each line
  • Sheet thickness, or the standard you build to, and the zinc coating (Z80 or Z275)
  • Seal type: rubber-sealed or plain ends
  • Delivery port, and whether the fittings ship on their own or with a machine order

Supply terms

Who supplies them. Taokron. We handle the take-off review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.

Lead time. Production time depends on the item mix and quantity and is confirmed at quotation. As a guide, a recent mixed order of about 1,900 bends and dampers was produced in 50 working days.

Shipping. FOB or delivered to your port, quoted per order. Fittings can ship on their own or share a container with a machine order.

Price. No price list. Every line is quoted from your take-off, by diameter, gauge, coating and quantity.

About marine duct penetrations

Are the sleeves ready to weld?

They are hot-dip galvanised Q235B steel with the duct mounting holes drilled at both ends. Welding into the bulkhead follows your yard's procedure.

Can you supply the whole accommodation duct system for a ship?

Yes: spiral duct and fittings, insulated duct, penetrations, clamps, flexible hose, air valves and cabin units can go on one take-off.

How long does production take?

Production time depends on the item mix and quantity and is confirmed at quotation. As a guide, a recent mixed order of about 1,900 bends and dampers was produced in 50 working days.

Do you have a price list?

No. Fittings are quoted per order from your take-off, because the price depends on the diameter, gauge, coating and quantity of each line. Send the list and we quote every line.

Request for quotation

Send your take-off for a quotation

Paste your take-off or bill of materials below: item, diameter, quantity, gauge and coating for each line, plus your delivery port. Ryan Tao replies within 12 hours. Excel or PDF lists can go to [email protected] or WhatsApp +61 435 074 994.

Quotation for: Marine Duct Penetrations

Need a machine as well? Use the full inquiry form