C/Z/U Purlin Roll Forming Machine
C, Z and U purlins, web 100 to 300 mm, 1.5 to 3 mm steel
Overview
What it makes
Cold-formed C, Z and U purlins for roof and wall framing of steel buildings, with bolt holes punched in line.
Web, flange and lip sizes are adjusted within the machine range, so one machine covers a family of sizes.
Reference: a C/Z purlin line supplied to Kenya.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Hole pattern to your drawing
- Hydraulic decoiler and leveller
- C only, Z only, or C/Z change on one line (see the quick-change machine)
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: C/Z/U Purlin Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Buyer guide: how to choose a C/Z purlin roll forming machine →
Frequently asked questions
About this machine
How do I change from one purlin size to another?
Size changes within the web, flange and lip range are made by adjusting the machine. Ask for the change procedure for your sizes when you send the drawings.
Can it punch the holes?
Yes. Punching is part of the line. Send the hole pattern and spacing you need.
Has one been supplied abroad?
Yes. One reference is a C/Z purlin line supplied to Kenya.
What thickness does it form?
1.5 to 3 mm per the catalogue. The size table on the drawing also lists 1 mm for small sections, so confirm your exact sizes with us.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
