Floor Deck (Metal Deck) Roll Forming Machine
Composite floor deck sheet, 0.8 to 1.5 mm, coil 1000 to 1250 mm
Overview
What it makes
Profiled steel deck that is laid on steel beams and filled with concrete to make a composite floor.
Heavier gauge and deeper ribs than roof sheet, so the machine has more stations and a bigger motor. Embossing on the ribs helps the concrete bond to the steel.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Deck profile to your engineer's drawing
- Hydraulic decoiler for heavy coils
- Run-out table to suit your span lengths
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Floor Deck (Metal Deck) Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Can it make the deck profile my structural engineer specifies?
Yes, if you send the profile drawing. Deck profiles are tied to load tables, so match the drawing exactly rather than an approximate shape.
What thickness range does it form?
0.8 to 1.5 mm per the catalogue.
Why does it need 22 kW?
Deeper ribs and thicker steel need more forming force across 26 stations than a roof sheet line.
How long are the sheets?
Length is set on the PLC per order. Tell us your longest span so the run-out table is sized for it.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
