Trapezoidal and Corrugated Roof Sheet Roll Forming Machine
Trapezoidal (box rib) and corrugated roof and wall sheet from 914 to 1250 mm coil
Overview
What it makes
Trapezoidal (box rib) and corrugated sheet for roofs and walls of factories, warehouses, farm sheds and houses.
One machine forms one profile. The rolls are cut to your drawing, so the rib height, pitch and cover width follow the sheet your market already uses.
The line runs from a decoiler through the roll stations to a hydraulic post-cut and a run-out table. Sheet length is set on the PLC screen.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Reference: fence and cladding sheet lines for Australia
Two fence and cladding sheet lines are in production for an Australian customer (Nov 2026), designed for G550 high-tensile coil, 940 mm feed width. High-strength steel like this needs the rolls, shafts and drive sized for it from the start, which is why we ask for the steel grade on every inquiry.
Options to discuss
- Frame: guide-pillar structure or wallboard structure (both shown in the catalogue)
- Manual or hydraulic decoiler
- Run-out table length to suit your longest sheet
- Profile made to your drawing or to a sample sheet you send us
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Trapezoidal and Corrugated Roof Sheet Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Market guide: roof sheet roll forming machines in Kenya →
Market guide: roofing sheet roll forming machines in Nigeria →
Frequently asked questions
About this machine
Can it run a profile that is not in the catalogue?
Yes. The profiles in the catalogue are examples. Send a drawing with cover width, rib height, pitch and coil width, or a photo of a sheet with a tape measure on it, and the rolls are designed to that profile. You get a profile drawing to approve before the rolls are made.
Can one machine make both corrugated and trapezoidal sheet?
Not on one set of rolls. This machine forms one profile. If you need two profiles from one footprint, look at the double layer roof sheet machine, which carries two profiles on two forming levels.
Can it form high-strength steel such as G550?
Yes, if the machine is designed for it from the start. Two fence and cladding sheet lines are in production for an Australian customer (Nov 2026), designed for G550 high-tensile coil, 940 mm feed width. Tell us the steel grade and thickness so the rolls, shafts and motor are sized for it.
What thickness range does it cover?
The catalogue machine is set up for 0.3 to 0.8 mm. Thicker or harder material needs a different design, so state your thickness and grade on the inquiry.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
