Glazed Tile (Step Tile) Roll Forming Machine
Step-tile roof sheet with hydraulic step pressing after forming
Overview
What it makes
Roof sheet with the look of a clay tile roof. The rolls form the wave across the sheet, then a hydraulic press puts in the step at each tile row and cuts the sheet to length.
Because the press stops the sheet at every step, forming speed is lower than a plain roof sheet machine.
Common on houses, villas and roofs where the owner wants a tile appearance with steel sheet weight.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Step pitch and step height to your tile design
- Manual or hydraulic decoiler
- Run-out table length
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Glazed Tile (Step Tile) Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Market guide: roof sheet roll forming machines in Kenya →
Market guide: roofing sheet roll forming machines in Nigeria →
Frequently asked questions
About this machine
Why is the speed only 3 to 5 m/min?
The sheet stops at every tile step while the hydraulic die presses the step. That press cycle sets the speed, not the roll stations.
Can I choose the tile pitch?
Yes. Tile pitch, step height and wave shape are set by the die and rolls, which are made to your drawing or sample.
Can the same machine make plain corrugated sheet?
No. The rolls are shaped for the tile wave. A separate roof sheet machine, or a double layer machine, covers plain profiles.
Which coils are used?
Pre-painted galvanised or zinc-aluminium coil is usual. Tell us coil width and thickness so the cover width can be confirmed.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
