Double Layer Roof Sheet Roll Forming Machine
Two roof sheet profiles on one machine, upper and lower forming levels
Overview
What it makes
Two different roof or wall sheet profiles from one machine. The upper level forms one profile and the lower level forms the other, sharing one frame, one cutting station and one control cabinet.
It suits shops that sell two common profiles (for example corrugated and trapezoidal) and do not have floor space or budget for two separate lines.
Only one level runs at a time. You switch the coil to the other level when you change product.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Both profiles made to your drawings
- Manual or hydraulic decoiler
- Run-out table length to suit your sheets
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Double Layer Roof Sheet Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Market guide: roof sheet roll forming machines in Kenya →
Market guide: roofing sheet roll forming machines in Nigeria →
Frequently asked questions
About this machine
Do both levels run at the same time?
No. One level forms at a time. You feed the coil into the level you need and select it on the control panel.
Can the two profiles use different coil widths?
Yes, as long as both fit the machine frame. Give us both profile drawings and coil widths and we confirm before quoting.
When is a double layer machine the wrong choice?
If both profiles sell in high volume every day, two single machines give you more output because both can run at once.
What thickness can it form?
0.3 to 1.0 mm per the catalogue. State your steel grade so it is checked against the design.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
