Gutter Roll Forming Machine
Half-round and box rain gutters from 247 to 645 mm strip
Overview
What it makes
Rain gutter for houses and sheds: half-round, box (K-style) and large industrial gutters.
The wide 635 and 645 mm examples in the catalogue are for large-section gutters on industrial roofs.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Gutter profile to your drawing
- Manual decoiler
- Run-out table
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Gutter Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Can it copy the gutter profile sold in my country?
Yes. Send a drawing or a short sample piece with dimensions. The rolls are made to that profile.
Can one machine make two gutter sizes?
Usually each profile needs its own roll set. Ask about your two sizes and we check if they can share a frame.
What thickness is common for gutters?
Most residential gutters are 0.4 to 0.6 mm. The machine covers 0.3 to 0.8 mm.
Do I also need a downpipe machine?
If you sell complete rainwater systems, yes. The downpipe machine uses the same coil types.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
