Foil Laminates and Films for Flexible Duct
AL+PET and AL+PET+AL laminates, PET, VMPET, PVC and PET+PET films, slit to the strip width your flexible duct machine runs

Overview
The strip that becomes the wall of a flexible duct. Aluminium-PET laminates in single-side and double-side builds, clear PET, metallised PET, PVC and PET+PET films, all wound on cores and slit to the width your forming head takes.
On this page: AL+PET and AL+PET+AL laminate tape, PET film tape, VMPET (metallised PET) tape, PVC film tape, PET+PET laminated film.
Which Taokron machine runs it? Our SBLR-600 flexible duct forming machine runs non-woven fabric, PVC film and aluminium foil, and the SBLR-600A runs aluminium foil. Both are listed for foil 0.02-0.08 mm thick, so pick a laminate inside that range and we slit it to the strip width the head takes (about 30-40 mm across most sizes on the SBLR-600). The flexible duct insulation machine runs foil strip 30-60 mm wide.
AL+PET and AL+PET+AL laminate tape

Aluminium foil laminated to PET film, on one side (AL+PET) or both sides (AL+PET+AL). The standard wall for aluminium flexible duct, and in colour for coloured duct.
Properties
| Aluminium thickness | 0.006-0.050 mm |
|---|---|
| PET thickness | 0.007-0.125 mm |
| Total thickness, listed grades | 20-100 µm |
| Width | 5-1600 mm |
| Core ID | 52, 76 or 152 mm, or 76 ± 0.5 mm or 105 ± 0.5 mm |
| Roll OD | 250-650 mm |
| Colours | Silver, black, copper, blue, yellow, pink, green |
| Class | Normal or flame retardant |
| Temperature range | -30 °C to +150 °C (AL+PET); -30 °C to +250 °C (AL+PET+AL) |
Single-side aluminium PET tape (AL+PET), listed grades
| Structure | Thickness (µm) | Weight (g/m²) | Strength (N/15 mm) |
|---|---|---|---|
| AL6/PET15 | 23 | 36 | 2.7 |
| AL6/PET18 | 26 | 43 | 2.7 |
| AL7/PET12 | 21 | 50 | 3 |
| AL9/PET12 | 23 | 45 | 2.7 |
| AL9/PET15 | 26 | 49 | 3 |
| AL9/PET20 | 31 | 55 | 3 |
| AL9/PET25 | 36 | 62 | 4 |
| AL12/PET12 | 26 | 53 | 2 |
| AL12/PET15 | 29 | 57 | 3 |
| AL12/PET20 | 34 | 63 | 4 |
| AL15/PET15 | 32 | 65 | 3 |
| AL25/PET15 | 42 | 92 | 3 |
| AL30/PET25 | 57 | 126 | 5 |
| AL40/PET30 | 72 | 153 | 5 |
| AL40/PET38 | 80 | 163 | 5 |
Double-side aluminium PET tape (AL+PET+AL), listed grades
| Structure | Thickness (µm) | Weight (g/m²) |
|---|---|---|
| AL9/PET12/AL9 | 34 | 70 |
| AL9/PET15/AL9 | 37 | 75 |
| AL9/PET18/AL9 | 40 | 80 |
| AL9/PET23/AL9 | 45 | 86 |
| AL12/PET15/AL12 | 43 | 91 |
| AL12/PET23/AL12 | 51 | 102 |
| AL20/PET12/AL20 | 56 | 130 |
| AL25/PET12/AL25 | 66 | 157 |




PET film tape

Clear polyester film for transparent flexible duct and as the film layer in laminates.
Properties
| Thickness | 6-125 µm |
|---|---|
| Width | 5-1600 mm |
| Core ID | 52, 76 or 152 mm, or 76 ± 0.5 mm or 105 ± 0.5 mm |
| Roll OD | 250-650 mm |
| Colour | Transparent |
| Class | Normal or flame retardant |
| Temperature range | -30 °C to +160 °C |
PET film, listed thicknesses
| Thickness (µm) | Weight (g/m²) | Yield (m²/kg) |
|---|---|---|
| 12 | 16.5 | 60 |
| 15 | 20.6 | 48 |
| 20 | 27.7 | 36 |
| 25 | 34.7 | 28 |
| 30 | 41.2 | 24 |
| 35 | 48.2 | 20 |
| 40 | 55.3 | 18 |
| 50 | 68.8 | 14 |
| 60 | 82.3 | 12 |
| 70 | 94.5 | 10 |
| 80 | 110 | 9 |
| 90 | 124 | 8 |
| 100 | 138 | 7 |

VMPET (metallised PET) tape

Vacuum-metallised polyester film, silver. A lighter alternative to aluminium foil for the duct wall or jacket.
Properties
| Thickness | 6-125 µm |
|---|---|
| Width | 5-1600 mm |
| Core ID | 52, 76 or 152 mm, or 76 ± 0.5 mm or 105 ± 0.5 mm |
| Roll OD | 250-650 mm |
| Colour | Silver |
| Class | Normal or flame retardant |
| Temperature range | -30 °C to +105 °C |
Metallised PET film, 12 µm grade
| Property | Value | Test method |
|---|---|---|
| Thickness | 12 µm | ASTM D374 |
| Tensile strength | > 160 MPa | ASTM D882 |
| Elongation at break | > 100 % | ASTM D882 |
| Shrinkage | < 2.0 % | ASTM D1204 |
| Reflectivity | 96-97 % | - |
| Wetting tension | > 35 dyne | - |

PVC film tape

PVC film in white, black or grey for PVC flexible duct.
Properties
| Thickness | 0.05-0.125 mm |
|---|---|
| Width | 5-2000 mm |
| Core ID | 52 or 76 mm (paper, iron or plastic tube), or 76 ± 0.5 / 105 ± 0.5 mm |
| Roll OD | 250-650 mm |
| Colours | White, black, grey |
| Class | Normal or flame retardant |
| Temperature range | -5 °C to +80 °C |

PET+PET laminated film

Two PET films laminated together for a stronger clear or black film wall.
Properties
| Film thickness | 0.007-0.125 mm |
|---|---|
| Width | 5-1600 mm |
| Core ID | 76 ± 0.5 mm or 105 ± 0.5 mm |
| Roll OD | 250-650 mm |
| Colours | Transparent, black |
| Class | Normal or flame retardant |
Who uses it
- Flexible duct makers producing aluminium, coloured, clear PET and PVC flexible duct for ventilation, air conditioning and exhaust
- Makers of insulated flexible duct, for the inner core and the outer jacket
- Converters who slit laminate to their own strip widths


Which Taokron machine runs it
Our SBLR-600 flexible duct forming machine runs non-woven fabric, PVC film and aluminium foil, and the SBLR-600A runs aluminium foil. Both are listed for foil 0.02-0.08 mm thick, so pick a laminate inside that range and we slit it to the strip width the head takes (about 30-40 mm across most sizes on the SBLR-600). The flexible duct insulation machine runs foil strip 30-60 mm wide.
What we need from you to quote
- Construction (for example AL9/PET12, VMPET, PVC film) and total thickness
- Width: full roll width or the slit strip width your machine takes
- Core ID and the largest roll OD your decoiler holds
- Class: normal or flame retardant, and colour
- Quantity, delivery port, and whether the rolls ship on their own or with a machine order
Supply terms
Who supplies them. Taokron. We check your specification, quote it, inspect the order before it ships and look after shipping and after-sales from Melbourne.
MOQ, lead time and price. On quotation. They depend on the construction, width and quantity.
Shipping. FOB or delivered to your port. Rolls can ship on their own or share a container with a machine order.
About foil laminates and films for flexible duct
Which laminate do I need for my flexible duct machine?
Tell us the machine, the duct diameters and the wall you make (aluminium, coloured, clear or PVC). Our flexible duct machines are listed for foil 0.02-0.08 mm, so we suggest a construction in that range and slit it to your strip width.
Can you slit to my strip width?
Yes. Laminates and films are slit from 5 mm up to 1600 mm wide (PVC up to 2000 mm), on the core size your decoiler takes.
Is a flame retardant version available?
Yes. AL+PET, AL+PET+AL, PET, VMPET, PVC and PET+PET are each offered in a normal or a flame retardant class. Tell us the class you need on the inquiry.
Do you have a price list?
No. MOQ, lead time and price on quotation. Send the construction, thickness, width, core and quantity and we quote it.
Request for quotation
Send your material spec for a quotation
Tell us the construction, thickness, width, core size, roll diameter, class (normal or flame retardant), quantity and delivery port. MOQ, lead time and price on quotation. Ryan Tao replies within 12 hours. Spec sheets can go to [email protected] or WhatsApp +61 435 074 994.
Quotation for: Foil Laminates and Films for Flexible Duct
Need a flexible duct machine as well? Use the full inquiry form


