Steel Wire, Aluminium Strip, Foil Tape and Hose Clamps for Flexible Duct
The rest of a flexible duct: helix wire, aluminium strip for semi-rigid duct, sealing tape and clamps

Overview
A flexible duct is more than its film. The steel wire helix, aluminium strip for semi-rigid duct, foil tape for joints and the clamps that fix the duct on site, all from the same supplier as the laminate.
On this page: Steel wire, Aluminium strip for semi-rigid duct, Aluminium foil tape, Stainless steel hose clamps.
Which Taokron machine runs it? Steel wire is the helix on the SBLR-600 and SBLR-600A flexible duct machines; the flexible duct insulation machine is listed for 0.8-1.2 mm wire. The SBLF-500 semi-rigid aluminium duct machine runs strip 0.08-0.15 mm thick and 60 mm wide, so the 80-100 µm strip in a 60 mm width suits it. For clamps on rigid duct see duct clamps and flexible hose.
Steel wire

Phosphate-coated or galvanised steel wire for the helix of flexible duct.
Phosphate steel wire
| Diameter (mm) | Tolerance (mm) | Tensile strength, min. (MPa) | Bend times, min. | Phosphate film, min. (g/m²) |
|---|---|---|---|---|
| 0.4 | ±0.01 | 1770 | 15 | 0.5 |
| 0.45 | ±0.01 | 1770 | 15 | 0.5 |
| 0.8 | ±0.01 | 1770 | 15 | 0.6 |
| 1 | ±0.02 | 1670 | 15 | 0.6 |
| 1.2 | ±0.02 | 1670 | 13 | 1 |
| 1.4 | ±0.02 | 1570 | 10 | 1 |
| 2 | ±0.03 | 1470 | 9 | 1 |
Galvanised steel wire
| Diameter (mm) | Tolerance (mm) | Tensile strength (N/mm²) | Bend times, min. | Zinc coating (g/m²) |
|---|---|---|---|---|
| 0.3-0.5 | ±0.01 | 1900-2300 | 15 | 20-50 |
| 0.6-1.0 | ±0.01 | 1700-1900 | 15 | 20-50 |
| 1.1-1.4 | ±0.01 | 1500-1700 | 15 | 50-80 |
| 1.4-2.0 | ±0.02 | 1500-1700 | 13 | 50-80 |
| 2.0-4.0 | ±0.02 | 1200-1500 | 10 | 50-80 |
Aluminium strip for semi-rigid duct

Soft-temper aluminium strip that is corrugated and lock-seamed into semi-rigid aluminium duct.
Properties
| Alloy and temper | 8011, O |
|---|---|
| Thickness | 80-100 µm |
| Width | 40-80 mm |
| Core ID | 76 or 152 mm |
| Roll OD | Under 650 mm |
| Tensile strength | 125-165 MPa |
| Elongation | 2-5 % |
| Colour | Silver |
| Temperature range | -30 °C to +250 °C |
Alloy 8011 chemical composition (%)
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other, each | Other, total | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.5-0.9 | 0.6-1 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | Remainder |

Aluminium foil tape

Self-adhesive aluminium foil tape for sealing duct joints and insulation seams.
Properties
| Backing thickness | 18-100 µm |
|---|---|
| Total thickness | 50-140 µm |
| Adhesion to steel | 20 N/25 mm |
| Tensile strength | 35 N/25 mm |
| Elongation | 3 % |
| Service temperature | -10 °C to 60 °C |
| Application temperature | -10 °C to 40 °C |
Stainless steel hose clamps

Worm-drive band clamps to fix flexible duct onto spigots and fittings.
Properties
| Material | Stainless steel |
|---|---|
| Band | 12 mm wide, 0.6 mm thick |
| Standard sizes | 0.04" to 24" |
| Colour | Silver |
| Packing | Carton |
Who uses it
- Flexible duct makers buying helix wire alongside their laminate
- Semi-rigid aluminium duct makers
- HVAC installers and distributors who need foil tape and clamps for flexible duct


Which Taokron machine runs it
Steel wire is the helix on the SBLR-600 and SBLR-600A flexible duct machines; the flexible duct insulation machine is listed for 0.8-1.2 mm wire. The SBLF-500 semi-rigid aluminium duct machine runs strip 0.08-0.15 mm thick and 60 mm wide, so the 80-100 µm strip in a 60 mm width suits it. For clamps on rigid duct see duct clamps and flexible hose.
What we need from you to quote
- Construction (for example AL9/PET12, VMPET, PVC film) and total thickness
- Width: full roll width or the slit strip width your machine takes
- Core ID and the largest roll OD your decoiler holds
- Class: normal or flame retardant, and colour
- Quantity, delivery port, and whether the rolls ship on their own or with a machine order
Supply terms
Who supplies them. Taokron. We check your specification, quote it, inspect the order before it ships and look after shipping and after-sales from Melbourne.
MOQ, lead time and price. On quotation. They depend on the construction, width and quantity.
Shipping. FOB or delivered to your port. Rolls can ship on their own or share a container with a machine order.
About steel wire, aluminium strip, foil tape and hose clamps
Which wire diameter do I need?
It depends on the duct diameter and the machine. Tell us the machine and the size range you make; the insulation machine, for example, is listed for 0.8-1.2 mm wire.
Phosphate or galvanised wire?
Both are offered. Phosphate wire is listed from 0.4 to 2 mm, galvanised from 0.3 to 4.0 mm with a 20-80 g/m² zinc coating. Tell us which your customers expect.
Can the aluminium strip be slit to 60 mm for an SBLF-500?
The strip is listed in 40-80 mm widths at 80-100 µm, which covers the 60 mm width and the lower part of the SBLF-500's 0.08-0.15 mm range.
Do you have a price list?
No. MOQ, lead time and price on quotation.
Request for quotation
Send your material spec for a quotation
Tell us the construction, thickness, width, core size, roll diameter, class (normal or flame retardant), quantity and delivery port. MOQ, lead time and price on quotation. Ryan Tao replies within 12 hours. Spec sheets can go to [email protected] or WhatsApp +61 435 074 994.
Quotation for: Steel Wire, Aluminium Strip, Foil Tape and Hose Clamps
Need a flexible duct machine as well? Use the full inquiry form


