Why Romania in 2026
Four kinds of project are driving duct demand in Romania: hospitals, data centres, logistics and industrial buildings, and energy-efficiency renovation. One caution first. Some of the public money behind them came from the EU Recovery and Resilience Facility, and that facility has now closed, so the pipeline is shifting toward other funds and private clients.
Hospitals and the end of the recovery plan
EU rules required every milestone in the national recovery plans to be completed by 31 August 2026, with the final payment request due by 30 September 2026. Romania's government approved the third and final revision of its plan (PNRR) in June 2026, which leaves about EUR 20.2 billion in grants and loans. For a duct shop that means some publicly funded work is in its closing phase and the funding behind it will taper.
The biggest hospital projects are the three regional emergency hospitals at Iasi, Cluj-Napoca and Craiova. The Iasi construction contract went to the Turkish contractor CCN in October 2025, and a contract for the 849-bed Cluj hospital was signed in May 2026. Reports in 2026 expected Craiova and Iasi around the end of 2028 and described Cluj as delayed, so treat the dates as moving. Funding is a mix of EIB loans, EU grants and the state budget, and sources disagree on whether recovery plan money is involved, so ask each client who pays. Operating theatres and laboratories need tightly sealed, often stainless ductwork; see our cleanroom duct guide and galvanised vs stainless comparison.
Data centres
The most concrete Bucharest project we found is S+B Gruppe's NIMB data centre beside Pipera metro station: 12 MW installed (6.7 MW of it IT load), more than 3,400 m² of white space, with a building permit received in 2026. Larger sites have been announced, including an 80 MW campus planned near Cluj-Napoca and a 70 MW one in Timisoara, but we could not confirm construction starts, so treat them as leads, not orders. White space often has little ductwork, but electrical rooms, offices and smoke extract still need sheet metal. Our data centre duct manufacturing guide covers the details.
Logistics, industry and renovation
- Logistics and industrial: Cushman & Wakefield Echinox reported modern industrial stock of 8.17 million m² at the end of the third quarter of 2026 and take-up of about 725,000 m² in the first nine months, three quarters of it in Bucharest and Timisoara. Warehouses, factories and their offices are the everyday work of most duct shops.
- Energy-efficiency renovation: the recovery plan included a renovation programme for residential and public buildings, with reports giving totals between EUR 1.8 and 2.9 billion. Where renovation adds mechanical ventilation, it creates ductwork orders, but ask clients which fund pays, because the same closing deadline applied.
- Offices and housing: building continues in Bucharest, Cluj-Napoca and Timisoara, but we found no reliable 2026 volume figures.
Standards and codes for ductwork in Romania
As an EU member Romania works with European standards, adopted nationally as SR EN, and Romanian specifications for sheet metal ductwork are normally drafted on them. In practice a Romanian duct shop builds to what the mechanical engineer's specification names, so check each project.
- SR EN 1505 and SR EN 1506: dimensions of rectangular and circular sheet metal air ducts, so that ducts and fittings from different makers fit together.
- SR EN 1507: strength and leakage of rectangular sheet metal ducts, including the reinforcement and joint requirements that drive which flange system a shop uses. See our air leakage classes guide.
- SR EN 12237 and EN 15727: strength and leakage of circular sheet metal ducts, relevant to spiral duct, and the leakage classification and test method shared by these standards.
- Normative I5-2022: the Romanian rulebook for the design, execution and operation of ventilation and air conditioning installations. It was approved by Order 173 of 1 February 2023, published in the Official Gazette on 8 February 2023, and replaced I5-2010. It sets system requirements rather than duct construction details, so confirm the current text with your designer.
- P118 fire safety: fire safety of buildings is covered by the P118 normatives, and the older P118/99 text defined fire dampers on ducts that cross fire-separating elements. We could not confirm the current clause numbers online, so ask your designer which fire-rated ducts and dampers the project requires.
- SMACNA and DW/144: on international projects the design team may name these beside the EN documents. See our international duct standards comparison, gauge chart and hangers and supports guide.
Importing duct machinery into Romania
- VAT: the standard Romanian VAT rate has been 21% since 1 August 2025, up from 19%, under Law 141/2025. Import VAT is generally charged on the customs value plus duty, and a VAT registered business can normally recover it as input tax. Confirm the treatment for your machine and your company with your accountant.
- Customs duty: Romania applies the EU Common Customs Tariff. For a machine from outside the EU, the duty depends on its full tariff classification and its origin, including any preferential trade agreement. Ask your customs broker to classify the machine; we do not quote a code or rate here.
- CE marking: machinery placed on the EU market needs CE marking. Until 19 January 2027 the Machinery Directive 2006/42/EC applies, and from 20 January 2027 Regulation (EU) 2023/1230 applies directly in every member state. Taokron machines are CE certified and ship with electrical diagrams and component lists. If your delivery is close to the changeover date, ask us which regime your documents follow.
- Customs and shipping: use a licensed customs broker, and tell us the town nearest your workshop when you request a quotation. Our importing guide covers the general paperwork.
Power supply: 230 V single phase, 400 V three phase, 50 Hz
Romania uses the European supply of 230 V at 50 Hz. Three phase workshops are normally supplied at 400 V between phases, but confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motors, drives and control transformer against your supply when we quote, so tell us your voltage at the start. See also duct machine voltage and frequency by country.
Typical Romanian shop set-ups and the machines that fit
Contractor shop, rectangular duct for offices and fit-outs
Many Romanian HVAC installers make their own duct in a small workshop. A practical set is the Rectangular Duct Line II SBAL-II, which handles 0.5 to 2.0 mm material at widths of 1250 or 1550 mm and a feeding speed of up to 18 m/min, or the Auto Duct Line SBAL-III, which adds hydraulic notching and shearing in the same 0.5 to 2.0 mm range at up to 18 m/min. Add a Pittsburgh lockformer (SBLC series), which forms Pittsburgh locks in 0.4 to 1.2 mm and snap locks in 0.7 to 1.5 mm, a TDF flange forming machine SBTDF for 0.5 to 1.2 mm or 0.8 to 1.5 mm with a 35 mm flange height, and a pneumatic folder SBWS.
Volume shop for hospitals, data centres and logistics
Shops chasing hospital and large warehouse packages need output and consistent quality over thousands of square metres. The Auto Duct Line SBAL-V is an automatic U-shape line that takes coil to finished panel in 0.5 to 1.5 mm at widths of 1250 or 1550 mm and 18 m/min, with TDF or angle flange forming built in. Behind it, the TDF duct zipper closes seams on 0.8 to 1.5 mm duct from 1000 to 1500 mm long, the hydraulic folder SBWS handles up to 2.0 mm on the 1550 mm model, and corner machines finish the flanges: the pneumatic corner mounting machine SBCC inserts corner pieces in material up to 1.5 mm, and the auto corner making machine produces the corner pieces at 40 to 120 pieces a minute. A Plasma Cutter SBPC1550 cuts fittings from nested drawings in 0.4 to 4 mm sheet on a 1550 mm wide table.
Round duct
Spiral duct suits exposed ceilings, car parks, warehouses and industrial extract. The Spiral Tubeformer SBTF-1500 makes diameters from 80 to 1500 mm in galvanised steel of 0.4 to 1.2 mm, and the SBTF-1602 goes to 1600 mm in galvanised steel or aluminium up to 1.3 mm. The Spiral Duct Flanging Machine SBFB-1600 turns flanges on round duct from 200 to 1600 mm. For a real example, see an Australian spiral duct maker, which added an SBTF-1602 in October 2026.
Hospital and industrial work
For stainless extract and heavier round duct, the Automatic Stitchwelder SB-ZF1500 welds longitudinal seams on 0.8 to 3 mm material in diameters of 150 to 1500 mm, covering the seams that a lock cannot. See our guide to spiral vs welded round duct.
Labour and space
Romania's gross minimum wage rose to 4,325 lei a month on 1 July 2026, and skilled sheet metal workers and operators earn more, so check current figures with your payroll adviser. Labour is tight. Reports attribute shortages in construction and manufacturing partly to years of emigration, and the 2026 quota for new non-EU workers is 90,000, which employer groups say is too low. An auto duct line replaces much of the manual marking, cutting, notching and folding, so a small crew can supply several sites.
Space is usually easier to find than staff. Modern industrial stock is concentrated around Bucharest (over 4 million m²), Timisoara, Ploiesti, Brasov and Cluj-Napoca. The auto duct line is the longest item, with coil racks at one end and a run-out table at the other; the SBAL-V occupies 14,500 mm by 4,950 mm or 5,350 mm depending on width, while the SBAL-III mainframe is 2,300 mm long with a separate decoiler. Ask us for a layout drawing before you sign a lease. Our factory layout guide has worked examples.
Working with Taokron from Romania
- Machines built since 1994 and supplied to 100+ countries, with 60+ patents, from an ISO 9001:2015 factory
- CE certified
- Wired for your three phase 50 Hz supply
- Installation and commissioning quoted per engineer-day
- Replies within 12 hours by email at [email protected] or on WhatsApp at +61 435 074 994
Get a Romania-ready Taokron quotation →
FAQ
Which ductwork standards are used in Romania?
Romania is an EU member, so ductwork is normally specified on European standards adopted as SR EN: EN 1505 and EN 1506 for the dimensions of rectangular and circular sheet metal ducts, EN 1507 for the strength and leakage of rectangular ducts, EN 12237 for circular ducts, and EN 15727 for leakage classification. The national ventilation rulebook is the normative I5-2022, issued by Order 173 of 1 February 2023, which replaced I5-2010. Fire rules sit in the P118 normatives. Always build to the documents named in the project specification.
What voltage and frequency do duct machines need in Romania?
Romania uses the European supply of 230 V at 50 Hz, and three phase workshops are normally supplied at 400 V between phases, but please confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motor, drive and control wiring against your supply when we quote.
What VAT and duties apply when importing duct machinery into Romania?
The standard Romanian VAT rate is 21%, up from 19% since 1 August 2025. Import VAT is generally charged on the customs value plus any duty, and a VAT registered business can normally recover it as input tax, but confirm this with your accountant. Romania applies the EU Common Customs Tariff, and the duty on a machine from outside the EU depends on its full tariff classification and origin, so ask your customs broker to classify the machine and confirm the rate before you budget.
Do duct machines sold into Romania need CE marking?
Yes. Machinery placed on the EU market must carry CE marking. Until 19 January 2027 that means the Machinery Directive 2006/42/EC, and from 20 January 2027 Regulation (EU) 2023/1230 applies. Taokron machines are CE certified. If your delivery is close to that date, ask us which regime the documents for your machine follow.
Where is ductwork demand in Romania coming from in 2026?
The main sources are hospital building, including the regional emergency hospitals at Iasi, Cluj-Napoca and Craiova, and other public work funded through the EU Recovery and Resilience Facility, which closed in 2026; data centres around Bucharest and announced sites near Cluj-Napoca and in Timisoara, not all of which will be built; logistics and industrial buildings around Bucharest and Timisoara; and energy-efficiency renovation of public and residential buildings.
Which machines should a new Romanian duct shop start with?
A contractor shop making rectangular duct for offices, shops and fit-outs usually starts with a rectangular duct line or auto duct line, a Pittsburgh lockformer, a TDF flange former and a folder. Add a duct zipper and corner machines as volume grows, a spiral tubeformer when round duct becomes regular work, and a plasma table for fittings. Send your duct sizes, gauges and monthly output and a Taokron engineer will propose a machine set within 12 hours.
Duct Shop Notes
One email a month for duct shop owners
Notes on machine choices, shop layout, duct standards and new machines. Reply "unsubscribe" any time to stop.
Thanks, you are subscribed. The first email arrives next month.