Part Leveler for Laser-Cut, Flame-Cut and Stamped Parts, 0.5 to 30 mm
Flattens cut and stamped parts up to 3000 mm wide, servo-hydraulic control
Overview
What it does
Cutting and stamping leave parts bowed and twisted. A part leveler feeds the parts through rolls that bend them back and forth with decreasing force, so warp, twist and residual stress are taken out without a press and a hammer.
Made for mixed batches of laser-cut, flame-cut and stamped parts in carbon steel, high-strength steel and stainless, 0.5 to 30 mm thick. Flat parts then go straight to welding, bending or assembly.
It replaces manual straightening in fabrication shops, construction machinery and automotive part suppliers, and in steel structure plants.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Roll diameter and count to your thinnest and thickest parts
- Working width to your largest part
- Recipes saved per part family
- Conveyors for loading and unloading
What we need from you to quote
- Part drawings or photos with thickness and size
- Materials and grades (high-strength steel?)
- How bent the parts are now, and how flat they must be
- Parts per shift
- Site power supply and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Part Leveler for Laser-Cut, Flame-Cut and Stamped Parts, 0.5 to 30 mm
Several machines or a complete line? Use the full inquiry form
Buyer guide: part leveling after laser and plasma cutting →
Frequently asked questions
About this machine
What parts does it flatten?
Laser-cut, flame-cut and stamped parts, including irregular shapes, in carbon steel, high-strength steel and stainless from 0.5 to 30 mm.
Does it remove the stress, or just flatten the part?
The alternating bending relieves residual stress as well, which is why parts stay flat after welding and bending instead of moving again.
Can one machine do thin and thick parts?
Within the range of the roll layout chosen. Very thin and very thick parts in one machine is a trade-off, so send your thinnest and thickest part and we size the rolls.
How are change-overs between part types handled?
Recipes for each thickness and material are stored and recalled on the controller, so mixed batches do not need re-tuning.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Leveling and embossing
