Thin-Sheet Precision Leveler, 0.1 to 6 mm
Cost-effective 4-high leveler for thin blanks and parts, work rolls 20 to 50 mm
Overview
What it does
A 4-high precision leveler for thin parts and blanks. Small work rolls, from 20 to 50 mm diameter, bend the sheet in many short cycles, so thin material that would just spring back on a big-roll machine is actually flattened.
Typical work is laser-cut and punched blanks, thin stamped parts and sheet for precision assembly in laser job shops, automotive, aerospace and electronics plants. Parts go straight on to bending, welding or assembly without hand straightening.
It is the lower-cost option in the range, meant for small and medium batches where you need flat thin parts every day but not a mirror-finish line.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Work roll diameter matched to your thinnest part
- Dense-pack roll layout (23, 25 or 27 rolls)
- Working width to suit your largest blank
- Stand-alone or linked to an existing line
What we need from you to quote
- Materials and thickness range of your parts
- Largest part size (width and length)
- Typical batch size and parts per shift
- Flatness you need
- Site power supply and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. If you need CE marking for this model, it is confirmed at quotation.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Thin-Sheet Precision Leveler, 0.1 to 6 mm
Several machines or a complete line? Use the full inquiry form
Buyer guide: part leveling after laser and plasma cutting →
Frequently asked questions
About this machine
What thickness can it level?
0.1 to 6 mm. The real range for your job depends on material, part width and the flatness you need, so send a few part drawings.
Which work roll diameter should I choose?
Smaller rolls flatten thinner material. Work rolls come in 20, 32, 40 and 50 mm; we choose with you from your thinnest and thickest parts.
Can it level laser-cut parts with holes and cut-outs?
Yes, laser and punched blanks are the main use. For heavy, irregular or flame-cut parts look at the part leveler instead.
Is it CE marked?
If you need CE marking for this model, tell us and it is confirmed at quotation.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Leveling and embossing
