6-High Precision Leveler for Sheet and Strip, 0.3 to 6 mm
Mark-free leveling of steel, stainless, aluminium and copper, 0.3 to 6.0 mm
Overview
What it does
A 6-high leveler stacks back-up rolls behind a row of small work rolls, so the work rolls can bend the sheet hard without flexing. The sheet is bent up and down many times with shrinking force until the internal stress evens out and it comes out flat.
This is the leveler to look at when surface matters: mirror and polished stainless, aluminium and copper, decorative panels and thin precision blanks. The fully supported work rolls are what stop roll marks, dents and scratches on soft or finished sheet.
It takes out wave, edge buckle and coil set before stamping, laser cutting, bending or coating, so downstream tools see a flat, stress-relieved part.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Roll diameter, roll count and working width to your parts
- Small-diameter rolls for sheet below 0.3 mm
- Feeding and discharge tables or connection to an existing line
- Saved recipes per material for quick change-over
What we need from you to quote
- Materials and grades (for example 304 mirror, 5052, C1100 copper)
- Thickness range and the widest and longest part or coil
- Flatness you need after leveling
- Whether the surface is polished, coated or film-protected
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: 6-High Precision Leveler for Sheet and Strip, 0.3 to 6 mm
Several machines or a complete line? Use the full inquiry form
Buyer guide: part leveling after laser and plasma cutting →
Frequently asked questions
About this machine
Why 6-high instead of 4-high?
The extra back-up rolls hold the small work rolls straight across the width. That gives even bending force edge to edge, which is what levels thin and soft sheet without leaving roll marks.
What thickness range does it level?
0.3 to 6.0 mm as standard. With custom small-diameter rolls the catalogue goes down to 0.05 mm for ultra-thin precision sheet.
Will it mark mirror stainless or aluminium?
The work rolls are super-finished and fully supported, which prevents dents, scratches and roll marks on mirror and non-ferrous sheet. Send a sample part if your surface is critical and we ask for a trial.
How fast is a change-over?
Recipes are stored on the controller and recalled in one step when the material changes. A full roll change is quoted at under 30 minutes.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Leveling and embossing
