Hydraulic Decoiler for Roll Forming Lines

Hydraulic expanding mandrel and push-button control, with an optional hydraulic coil car

Hydraulic Decoiler for Roll Forming Lines
WhatsApp an engineerPrice, lead time and layout within 12 hours

Overview

What it does

A hydraulic decoiler holds the coil at the entry of a roll forming line and pays the strip off into the forming machine. The coil sits on a mandrel whose leaves are expanded hydraulically to grip the inside of the coil, with a backplate on the frame side.

It is run from a push-button control box on the stand and fed by its own hydraulic power pack. The photos also show it with a hydraulic coil car: the car runs on a short track under the mandrel, lifts the coil on a scissor table and carries it onto the mandrel, so a heavy coil is loaded without a crane.

Every decoiler is sized to the coil it carries. Tell us the coil weight, inner and outer diameter and width, and the line it feeds, and we configure it. A manual decoiler is also available for light coils.

More photos

Video

See it running: we send the factory video of this machine on WhatsApp.

Ask for a video on WhatsApp

Options to discuss

  • Hydraulic coil car for loading
  • Manual decoiler for light coils
  • Mandrel and backplate sized to your coil inner diameter and width
  • Supplied with a new roll forming line or matched to a line you already run

What we need from you to quote

  • Maximum coil weight
  • Coil inner diameter, outer diameter and width
  • Material and thickness range
  • The line it feeds: make, profile and speed
  • Site power supply (voltage, phase, frequency) and destination port

Supply terms

Who supplies it. Taokron. We handle the inquiry, coil data review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.

Lead time and warranty. Confirmed on the quotation; with a new roll forming line it ships with the line, about 60 working days from drawing approval and deposit. 12 months warranty from arrival at your factory.

Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.

CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.

Price. Every decoiler is sized to a coil, so there is no list price. Send the coil data and we quote it.

About this machine

Do I need a hydraulic decoiler or a manual one?

A manual decoiler suits light coils on narrow-strip lines. Heavier and wider coils are easier and safer to load and run on a hydraulic decoiler. Tell us the coil weight and we suggest one.

Can it be added to a line I already have?

Yes. Send the coil data and the line it feeds, and the decoiler is matched to it.

Is the coil car included?

It is an option. The photos show the decoiler with a hydraulic coil car; it is quoted separately.

What coil sizes does it take?

Each decoiler is sized to your coil weight, inner and outer diameter and width. The figures are confirmed on the quotation.

How long is delivery and what warranty do I get?

Lead time is confirmed on the quotation; with a new roll forming line it ships with the line, about 60 working days from drawing approval and deposit. The warranty is 12 months from the day the machine arrives at your factory.

Is the machine CE marked?

CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.

Price request

Ask for a quotation on this machine

Send your coil weight, inner and outer diameter, width and thickness, and tell us the line it feeds. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the details on WhatsApp +61 435 074 994.

Quotation for: Hydraulic Decoiler for Roll Forming Lines

Several machines or a complete line? Use the full inquiry form