Light Gauge Steel Stud and Track (Keel) Roll Forming Machine
Drywall studs, tracks, furring channels and wall angles, 0.3 to 1.0 mm
Overview
What it makes
Light gauge steel members for plasterboard walls and ceilings: studs, tracks, furring channels and wall angles.
Each profile is small and light, so these lines run fast and are often bought in sets, one machine per profile.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Profile and knurling to your drawing
- Punched service holes
- Manual decoiler
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Light Gauge Steel Stud and Track (Keel) Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Do I need one machine per profile?
Usually yes for studs and tracks of different sizes. Tell us the full list and we check which can share a machine.
Can it match my local drywall system?
Yes, if you send the section drawings. Studs and tracks must fit each other and the board system you sell.
What thickness is typical?
0.4 to 0.75 mm for most drywall systems. The machine covers 0.3 to 1.0 mm.
What about structural framing for houses?
That is a different machine. See the light steel framing machine.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
