Storage Rack Upright Roll Forming Machine
Pallet rack and shelving uprights with punching, 1.5 to 3 mm
Overview
What it makes
Punched uprights (columns) for pallet racking and heavy shelving. The catalogue shows six sections from 80x60 to 120x85 mm.
The line has a servo feeder and punching press for the beam slots and bolt holes, forming stations, correction and a servo tracking cut.
More photos
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Slot pattern to your rack system
- Upright sizes to your range
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Storage Rack Upright Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Can it match my rack system's slot pattern?
Yes. The punching die is made to your drawing. Beams and connectors must fit, so be exact.
Does it make the beams too?
No. Beams are a different profile and machine. Ask if you need a beam line.
Which sizes are possible?
The catalogue shows 80x60 to 120x85 mm. Others are made to drawing.
What thickness does it form?
1.5 to 3 mm.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
