Elevator Guide Rail Roll Forming Machine
Cold-formed guide rail sections, 41 mm wide, with punching and servo tracking cut
Overview
What it makes
Cold-formed elevator guide rail sections: 41 mm wide lipped sections (41x41, 41x52, 41x72 in the catalogue) and a T-shaped rail.
The line includes a levelling decoiler, servo feeder, punching press, forming, correction and a servo tracking cut, so the profile is cut while it keeps moving.
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Punch pattern to your drawing
- Section sizes to your range
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Elevator Guide Rail Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
What is a tracking cut?
The cutting unit travels with the profile and cuts without stopping the line, so the line keeps forming.
Can it punch fixing holes?
The line has a punching press before forming. Send your hole pattern and we confirm it.
Which sizes are possible?
The catalogue shows 41 mm wide sections at 41, 52 and 72 mm depth and a T-rail. Other sizes are made to drawing.
What thickness does it form?
1.5 to 3 mm.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
