Solar Mounting Channel Roll Forming Machine
41.3 mm C channels with serrated lips and slotted holes for solar PV racking
Overview
What it makes
C channels 41.3 mm wide with serrated (toothed) lips and slotted holes, used as rails and struts in ground-mount and roof-mount solar PV structures.
The line has a servo feeder and punching press before 28 forming stations and a servo tracking cut.
Video
Running videos of this machine type are available on request.
Ask for a video on WhatsAppProfile drawings
Profiles from the catalogue, dimensions in mm. Your line is built to your own drawing.
Options to discuss
- Slot pattern and channel depth to your racking system
- Hydraulic decoiler
What we need from you to quote
- Profile drawing with dimensions, or a sample piece measured with a tape
- Material, steel grade and thickness range
- Coil width and coil weight you buy
- Lengths you cut and rough daily output
- Site power supply (voltage, phase, frequency) and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, profile drawing review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time and warranty. About 60 working days from drawing approval and deposit. 12 months warranty from commissioning.
Commissioning. Remote video support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Every line is configured to a profile, so there is no list price. Send the profile and we quote that line.
Price request
Ask for a quotation on this machine
Send your profile drawing (or a photo of the profile with dimensions), material, thickness and coil width. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send the drawing on WhatsApp +61 435 074 994.
Quotation for: Solar Mounting Channel Roll Forming Machine
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
Can it match my racking supplier's channel?
Yes, with a drawing of the section, teeth and slots. The serrated lip must fit your channel nuts.
What depths are possible?
The catalogue shows four depths from 136, 155, 175 and 195 mm strip. Others are made to drawing.
Is pre-galvanised or Zn-Al-Mg coil OK?
Coated coil is normal for solar racking. Tell us the coating and thickness.
What thickness does it form?
1.5 to 3 mm.
How long is delivery and what warranty do I get?
About 60 working days from drawing approval and deposit, then sea freight to your port. The warranty is 12 months from commissioning.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation. Where a machine is CE marked, we send its conformity document with the quotation on request.
Roll forming machines
