Insights · Market guide

HVAC Duct Fabrication in Poland 2026: Market, Standards and Machines

Poland's ductwork market is led by Warsaw and the Mazovia region, with other strong hubs in Upper Silesia, Lodz, Wroclaw, Poznan, Krakow and the Tricity around Gdansk. This guide is for duct shop owners and HVAC contractors there who are deciding whether to add capacity or automate. It covers where the demand is coming from in 2026, the European and Polish standards behind duct specifications, the VAT and CE questions to settle before you order a machine from outside the EU, the 50 Hz power supply, and the machine set-ups that fit typical Polish shops, rectangular duct first.

Why Poland in 2026

Four kinds of project are driving duct demand in Poland: warehouses and logistics, data centres, hospitals and public buildings, and long-term infrastructure. One caution first. Part of the public money came from the EU recovery plan (KPO), and its deadlines fall in 2026, so the pipeline is shifting toward other funds and private clients.

Warehouses and logistics

This is the everyday work of most Polish duct shops. Colliers reports gross warehouse take-up of about 5.3 million m² in the first nine months of 2026, up 20% on the same period of 2025 and the strongest start to a year on record. BNP Paribas Real Estate puts modern industrial and logistics stock at just over 38 million m² at the end of June 2026, with vacancy of 6.6%, and names Upper Silesia and the Warsaw II zone as where new projects are concentrated. Warehouses need ventilation, offices, welfare areas and often heating and extract in production halls, which means steady sheet metal work.

Data centres around Warsaw

Data4 opened a second 10 MW building at its Jawczyce campus just outside Warsaw in April 2026, and said the campus is expected to reach up to 60 MW. Data4 also plans to raise its total investment in Poland to around EUR 600 million by 2030. Switch Datacenters has announced a campus at Mory near Warsaw, described as 90 MW of power capacity with a first phase of 60 MW of IT load and a first construction phase planned for 2026. We could not confirm that construction has started, so treat it as a lead, not an order. Market reports put operational data centre capacity in Warsaw at roughly 150 to 160 MW. White space often has little ductwork, but electrical rooms, offices and smoke extract still need sheet metal. Our data centre duct manufacturing guide covers the details.

Hospitals, public buildings and the recovery plan

The European Commission requires member states to complete all recovery plan milestones by August 2026 and file last payment requests by the end of September. Poland cut the loan part of its plan by EUR 5.1 billion in its final revision, and reports differ on whether settlement of some investments runs to the end of 2026, so ask each client which fund pays and when. Hospital projects continue regardless of the deadline. The best documented large example we found is the new oncology hospital in Wroclaw: PORR signed a PLN 1.055 billion design and build contract in May 2023 with a 51 month schedule and first patients expected in 2027 or 2028. Smaller hospital expansions, such as the Bydgoszcz one Budimex is completing, add steady work. Operating theatres and laboratories need tightly sealed, often stainless ductwork; see our cleanroom duct guide and galvanised vs stainless comparison.

Long-term infrastructure

  • CPK airport: the planned central airport between Warsaw and Lodz still carries an official opening target of 2032. Terminal foundation works were scheduled to start in September 2026, but a law firm status page dated 6 November 2026 says the main building permit was not yet secured. Its mechanical fit-out is years away, so treat it as a long-term signal, not near-term demand.
  • Offices and housing: building continues in Warsaw, Krakow, Wroclaw, Poznan and the Tricity, but we found no reliable 2026 volume figures.

Standards and codes for ductwork in Poland

As an EU member Poland works with European standards, adopted nationally as PN-EN, and Polish specifications for sheet metal ductwork are normally drafted on them. In practice a Polish duct shop builds to what the mechanical engineer's specification names, so check each project.

  • PN-EN 1505 and PN-EN 1506: dimensions of rectangular and circular sheet metal air ducts, so that ducts and fittings from different makers fit together. Polish specifications and ITB guidance for steel ventilation ducts refer to PN-EN 1505.
  • PN-EN 1507: strength and leakage of rectangular sheet metal ducts, including the reinforcement and joint requirements that drive which flange system a shop uses. See our air leakage classes guide.
  • PN-EN 12237: strength and leakage of circular sheet metal ducts, relevant to spiral duct. Some older Polish specifications still cite the older standard PN-B-76001 for duct airtightness, so read the project documents.
  • PN-EN 16798: the European standard for ventilation design inputs and indoor environment, used by designers beside the building regulations.
  • Warunki Techniczne (WT 2021): the Polish technical conditions for buildings, which cover ventilation and energy requirements. Amendments came into force in February 2022, and articles report further changes for 2026, so confirm the current consolidated text with your designer rather than relying on a year label.
  • Construction product documentation: ITB, Poland's building research institute, publishes guidance on placing ventilation ducts on the market (WO-KOT/36/01 for steel ventilation ducts). We could not confirm which route applies to a given duct, so ask your designer or ITB.
  • SMACNA and DW/144: on international projects the design team may name these beside the EN documents. See our international duct standards comparison, gauge chart and hangers and supports guide.

Importing duct machinery into Poland

  • VAT: the standard Polish VAT rate is 23%. Import VAT is generally charged on the customs value plus duty, and a VAT registered business can normally recover it as input tax. Sources differ on how import VAT can be deferred, so confirm the procedure with your customs broker and accountant.
  • Customs duty: Poland applies the EU Common Customs Tariff. For a machine from outside the EU, the duty depends on its full tariff classification and its origin, including any preferential trade agreement. Ask your customs broker to classify the machine and check TARIC before you budget; we do not quote a code or rate here.
  • EORI: an EU importer needs an EORI number to lodge customs declarations. Your broker can confirm what is needed for your company.
  • CE marking: machinery placed on the EU market needs CE marking. Until 19 January 2027 the Machinery Directive 2006/42/EC applies, and from 20 January 2027 Regulation (EU) 2023/1230 applies directly in every member state. Taokron machines are CE certified and ship with electrical diagrams and component lists. If your delivery is close to the changeover date, ask us which regime your documents follow.
  • Customs and shipping: use a licensed customs broker, and tell us the town nearest your workshop when you request a quotation. Our importing guide covers the general paperwork.

Power supply: 230 V single phase, 400 V three phase, 50 Hz

Poland uses the European supply of 230 V single phase and 400 V three phase at 50 Hz. Confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motors, drives and control transformer against your supply when we quote, so tell us your voltage at the start. See also duct machine voltage and frequency by country.

Typical Polish shop set-ups and the machines that fit

Contractor shop, rectangular duct for offices and fit-outs

Many Polish HVAC installers make their own duct in a small workshop. A practical set is the Rectangular Duct Line II SBAL-II, which handles 0.5 to 2.0 mm material at widths of 1250 or 1550 mm and a feeding speed of up to 18 m/min, or the Auto Duct Line SBAL-III, which covers the same 0.5 to 2.0 mm range at up to 18 m/min with an 8,000 kg decoiler capacity. Add a Pittsburgh lockformer (SBLC series), which forms Pittsburgh locks in 0.4 to 1.2 mm and snap locks in 0.7 to 1.5 mm, a TDF flange forming machine SBTDF for 0.5 to 1.2 mm or 0.8 to 1.5 mm with a 35 mm flange height, and a pneumatic folder SBWS.

Volume shop for warehouses, data centres and hospitals

Shops chasing large warehouse and hospital packages need output and consistent quality over thousands of square metres. The Auto Duct Line SBAL-V is a coil-fed line for 0.5 to 1.5 mm material at widths of 1250 or 1550 mm and 18 m/min. Behind it, the TDF duct zipper closes seams on 0.8 to 1.5 mm duct from 1000 to 1500 mm long, the hydraulic folder SBWS handles up to 2.0 mm on the 1550 mm model, and corner machines finish the flanges: the pneumatic corner mounting machine SBCC inserts corner pieces in material up to 1.5 mm, and the auto corner making machine produces the corner pieces at 40 to 120 pieces a minute. A Plasma Cutter SBPC1550 cuts fittings from nested drawings in 0.4 to 4 mm sheet on a 1550 mm wide table.

Round duct

Spiral duct suits exposed ceilings, warehouses, production halls and industrial extract. The Spiral Tubeformer SBTF-1500 makes diameters from 80 to 1500 mm in galvanised steel of 0.4 to 1.2 mm, and the SBTF-1602 goes to 1600 mm in galvanised steel or aluminium up to 1.3 mm. For heavier work the SBTF-2020 makes diameters from 80 to 2500 mm in galvanised steel or aluminium up to 2.0 mm. The Spiral Duct Flanging Machine SBFB-1600 turns flanges on round duct from 200 to 1600 mm. For a real example, see an Australian spiral duct maker, which added an SBTF-1602 in October 2026.

Hospital and industrial work

For stainless extract and heavier round duct, the Automatic Stitchwelder SB-ZF1500 welds longitudinal seams on 0.8 to 3 mm material in diameters of 150 to 1500 mm, covering the seams that a lock cannot. See our guide to spiral vs welded round duct.

Labour and space

Poland's gross minimum wage is PLN 4,806 a month in 2026, and a figure of PLN 4,950 has been reported for January 2027. Skilled sheet metal workers and operators earn more, so check current figures with your payroll adviser. Labour is tight: a Randstad report cited in September 2026 puts the construction sector about 150,000 workers short, with engineer turnover at 42%. An auto duct line replaces much of the manual marking, cutting, notching and folding, so a small crew can supply several sites.

Space is usually easier to find than staff, with the warehouse stock noted above concentrated around Warsaw, Upper Silesia, Lodz, Wroclaw and Poznan. The auto duct line is the longest item, with coil racks at one end and a run-out table at the other; the SBAL-V occupies 14,500 mm by 4,950 mm or 5,350 mm depending on width, while the SBAL-III mainframe is 2,300 mm long with a separate decoiler. Ask us for a layout drawing before you sign a lease. Our factory layout guide has worked examples.

Working with Taokron from Poland

  • Machines built since 1994 and supplied to 100+ countries, with 60+ patents, from an ISO 9001:2015 factory
  • CE certified
  • Wired for your three phase 50 Hz supply
  • Installation and commissioning quoted per engineer-day
  • Replies within 12 hours by email at [email protected] or on WhatsApp at +61 435 074 994

Get a Poland-ready Taokron quotation →

FAQ

Which ductwork standards are used in Poland?

Poland is an EU member, so ductwork is normally specified on European standards adopted as PN-EN: EN 1505 and EN 1506 for the dimensions of rectangular and circular sheet metal ducts, EN 1507 for the strength and leakage of rectangular ducts, EN 12237 for circular ducts, and EN 16798 for ventilation design inputs. Building rules sit in the Warunki Techniczne (the technical conditions for buildings, often called WT 2021 after the energy-efficiency changes that took effect that year), which have been amended since, so check the current text. Always build to the documents named in the project specification.

What voltage and frequency do duct machines need in Poland?

Poland uses the European supply of 230 V single phase and 400 V three phase at 50 Hz, but please confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motor, drive and control wiring against your supply when we quote.

What VAT and duties apply when importing duct machinery into Poland?

The standard Polish VAT rate is 23%. Import VAT is generally charged on the customs value plus any duty, and a VAT registered business can normally recover it as input tax, but sources differ on how import VAT is deferred, so confirm the procedure with your customs broker and accountant. Poland applies the EU Common Customs Tariff, and the duty on a machine from outside the EU depends on its full tariff classification and origin, so check TARIC with your broker before you budget. You will also need an EORI number to lodge customs declarations.

Do duct machines sold into Poland need CE marking?

Yes. Machinery placed on the EU market must carry CE marking. Until 19 January 2027 that means the Machinery Directive 2006/42/EC, and from 20 January 2027 Regulation (EU) 2023/1230 applies. Taokron machines are CE certified. If your delivery is close to that date, ask us which regime the documents for your machine follow.

Where is ductwork demand in Poland coming from in 2026?

The main sources are warehouse and logistics building, which Colliers reports at record take-up for the first nine months of 2026; data centres around Warsaw, such as the Data4 campus at Jawczyce and a planned Switch Datacenters campus at Mory; hospital and public building projects, some of them funded through the EU recovery plan (KPO) whose deadlines fall in 2026; and long-term infrastructure such as the planned CPK airport, which is still years from needing mechanical fit-out.

Which machines should a new Polish duct shop start with?

A contractor shop making rectangular duct for offices, shops and fit-outs usually starts with a rectangular duct line or auto duct line, a Pittsburgh lockformer, a TDF flange former and a folder. Add a duct zipper and corner machines as volume grows, a spiral tubeformer when round duct becomes regular work, and a plasma table for fittings. Send your duct sizes, gauges and monthly output and a Taokron engineer will propose a machine set within 12 hours.

Duct Shop Notes

One email a month for duct shop owners

Notes on machine choices, shop layout, duct standards and new machines. Reply "unsubscribe" any time to stop.

12-hour reply

Setting up or upgrading a duct shop in Poland? A Taokron engineer replies within 12 hours.

Ask an engineer

Engineer reply

Ask an engineer about this guide

Describe your job and what you are trying to make. Ryan Tao replies within 12 hours.

Guide: HVAC Duct Fabrication in Poland 2026: Market, Standards and Machines

Not ready for a quote? Get the 2026 catalogue by email: 66 machines, one page each.

Machinery for this application

The duct fabrication workflows above run on standard Taokron equipment: spiral tubeformers for round duct, auto duct production lines for rectangular duct, and TDF flange and lockformer machines for closure, or browse the full machine catalog.