Insights · Market guide

HVAC Duct Fabrication in Serbia 2026: Market, Standards and Machines

Serbia's ductwork market is centred on Belgrade, with industrial and public work in Nis, Kragujevac and Novi Sad. This guide is for duct shop owners and HVAC contractors there who are deciding whether to add capacity or automate. It covers where the demand is coming from in 2026, the SRPS EN standards behind duct specifications, the VAT, customs and conformity questions to settle before you import a machine into a country outside the EU, the 50 Hz power supply, and the machine set-ups that fit typical Serbian shops.

Why Serbia in 2026

Four kinds of project are driving duct demand in Serbia: the Expo 2027 programme in Belgrade, hospitals, digital infrastructure, and industrial and mixed-use building. One caution first. Several large public schedules have slipped or are described differently by different sources, so use the dates below as a guide to where work is heading, and ask each client for the current programme.

Expo 2027 and the Belgrade building pipeline

Expo 2027 runs from 15 May to 15 August 2027 on a purpose-built site at Surčin, on the edge of Belgrade, with exhibition halls, pavilions, congress space and about 1,500 housing units for delegations. A July 2026 Forbes Serbia report, republished by Vreme, said the halls and national pavilion were more than 80 percent built, the halls would be ready in the autumn and the national pavilion and supporting buildings by March or April 2027. The separate national football stadium is less certain: Forbes Serbia gave early 2028 and other reports differ, so treat its date as moving. Large halls, congress space and hotels are ventilation heavy, and fit-out work follows the shell.

Beyond Expo, Belgrade Waterfront is still adding buildings, and the Marina Dorcol scheme on the Sava, a EUR 390 million project with a first phase of 263 apartments and 5,000 m² of commercial space, has broken ground with Strabag as shell-and-core contractor and a first phase target of the third quarter of 2028. Apartment blocks and commercial podiums are everyday work for rectangular duct shops.

Hospitals

Serbia has announced a large health building programme. It includes a EUR 315 million European Investment Bank loan towards a EUR 662 million reconstruction of four clinical centres, a planned EUR 85.2 million hospital complex in Uzice with a building permit issued, and the Tirsova 2 children's hospital in Belgrade, whose opening date has moved more than once. Many items are announcements rather than signed contracts, so confirm status with the contractor. Operating theatres and laboratories need tightly sealed, often stainless ductwork; see our cleanroom duct guide and galvanised vs stainless comparison.

Data centre and industry

  • Kragujevac State Data Centre: part of the Innovation District, described by officials as a 1,180 rack facility designed to Tier 4 reliability, with a first phase of EUR 30 million. We could not confirm whether the 2026 completion targets were met. Data halls carry little rectangular duct, but plant rooms, offices and smoke extract still need sheet metal. Our data centre duct manufacturing guide has the detail.
  • Industrial plants: Ariston opened a EUR 75 million plant with 30,000 m² of production space in the North 2 industrial zone of Nis in December 2025, making enamelled cylinders and heat pump components. Foreign-owned plants in Nis, Kragujevac and other cities keep adding halls, offices and extract systems, though we found no reliable total for 2026.

Standards and codes for ductwork in Serbia

Serbia adopts European standards nationally as SRPS EN, and specifications for sheet metal ductwork are normally drafted on them. In practice a Serbian duct shop builds to what the mechanical engineer names, so check each project.

  • SRPS EN 1505: dimensions of rectangular sheet metal air ducts, listed by the Institute for Standardization of Serbia (ISS) as SRPS EN 1505:2010, so that ducts and fittings from different makers fit together.
  • SRPS EN 12237: strength and leakage of circular sheet metal ducts, relevant to spiral duct, listed by ISS as SRPS EN 12237:2010 and confirmed in 2024.
  • EN 1507: strength and leakage of rectangular ducts, including the reinforcement and joint requirements that drive which flange system a shop uses. We could not confirm its Serbian adoption status online, so ask your designer or check the ISS catalogue. See our air leakage classes guide. A draft European standard, prEN 18289, is intended to replace several of these ductwork standards, but it is not yet published.
  • Building energy rulebooks: the Rulebook on energy efficiency of buildings (Official Gazette 61/2011) and the rulebook on energy performance certificates (69/2012, amended 2018). We did not find their ventilation clauses in the sources we checked, so confirm what applies to each project with your designer.
  • SMACNA and DW/144: on international and investor-led projects the design team may name these beside the EN documents. See our international duct standards comparison, gauge chart and hangers and supports guide.

Importing duct machinery into Serbia

Serbia is an EU candidate, not a member, so imports pass through Serbian customs and not through the EU single market.

  • VAT: the standard Serbian VAT rate is 20%. Import VAT is paid to Serbian Customs at clearance, generally on the customs value plus any duty, and only a Serbian VAT registered entity can normally recover it. Confirm the treatment with your accountant.
  • Customs duty: Serbia applies its own customs tariff. Duty depends on the machine's classification and origin, and Serbia has free trade agreements with the EU, CEFTA, EFTA, Turkey and the Eurasian Economic Union. Goods from countries without an agreement pay the full tariff rate. Ask your customs broker which rate applies to your machine; we do not quote a code or rate here.
  • Conformity marking: the Serbian Rulebook on the safety of machinery is aligned with Directive 2006/42/EC. ISS states that the CE marking does not replace the Serbian Mark of Conformity, and that the CE-only route for machinery applies from a later date. Rules like this change, so ask your broker or a Serbian conformity body what your machine needs. Taokron machines are CE certified and ship with electrical diagrams and component lists.
  • Customs and shipping: use a licensed customs broker, and tell us the town nearest your workshop when you request a quotation. Our importing guide covers the general paperwork.

Power supply: 230 V single phase, 400 V three phase, 50 Hz

Serbia uses 230 V at 50 Hz. Three phase workshops are normally supplied at 400 V between phases, but confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motors, drives and control transformer against your supply when we quote, so tell us your voltage at the start. See also duct machine voltage and frequency by country.

Typical Serbian shop set-ups and the machines that fit

Contractor shop, rectangular duct for offices and fit-outs

Many Serbian HVAC installers make their own duct in a small workshop. A practical set is the Rectangular Duct Line II SBAL-II, which handles 0.5 to 2.0 mm material at widths of 1250 or 1550 mm and a feeding speed of up to 18 m/min, or the Auto Duct Line SBAL-III, which adds hydraulic notching and shearing in the same 0.5 to 2.0 mm range at up to 18 m/min. Add a Pittsburgh lockformer (SBLC series), which forms Pittsburgh locks in 0.4 to 1.2 mm and snap locks in 0.7 to 1.5 mm, a TDF flange forming machine SBTDF for 0.5 to 1.2 mm or 0.8 to 1.5 mm with a 35 mm flange height, and a pneumatic folder SBWS.

Volume shop for Expo-scale, hospital and commercial packages

Shops chasing large hall, hospital and apartment packages need output and consistent quality over thousands of square metres. The Auto Duct Line SBAL-V is an automatic U-shape line that takes coil to finished panel in 0.5 to 1.5 mm at widths of 1250 or 1550 mm and 18 m/min, with TDF or angle flange forming built in. Behind it, the TDF duct zipper closes seams on 0.8 to 1.5 mm duct from 1000 to 1500 mm long, the hydraulic folder SBWS handles up to 2.0 mm on the 1550 mm model, and corner machines finish the flanges: the pneumatic corner mounting machine SBCC inserts corner pieces in material up to 1.5 mm, and the auto corner making machine produces the corner pieces at 40 to 120 pieces a minute. A Plasma Cutter SBPC1550 cuts fittings from nested drawings in 0.4 to 4 mm sheet on a 1550 mm wide table.

Round duct

Spiral duct suits exposed ceilings, car parks, warehouses and industrial extract. The Spiral Tubeformer SBTF-1500 makes diameters from 80 to 1500 mm in galvanised steel of 0.4 to 1.2 mm, and the SBTF-1602 goes to 1600 mm in galvanised steel or aluminium up to 1.3 mm. The Spiral Duct Flanging Machine SBFB-1600 turns flanges on round duct from 200 to 1600 mm. For a real example, see an Australian spiral duct maker, which added an SBTF-1602 in October 2026.

Hospital and industrial work

For stainless extract and heavier round duct, the Automatic Stitchwelder SB-ZF1500 welds longitudinal seams on 0.8 to 3 mm material in diameters of 150 to 1500 mm, covering the seams that a lock cannot. See our guide to spiral vs welded round duct.

Labour and space

We found no reliable current figure for sheet metal wages or the supply of trained duct fitters in Serbia, so check with a local recruiter before you plan crew size. Many Serbian shops are small, and an auto duct line replaces much of the manual marking, cutting, notching and folding, so a small crew can supply several sites without a long training period.

Plan the floor first. The auto duct line is the longest item, with coil racks at one end and a run-out table at the other; the SBAL-V occupies 14,500 mm by 4,950 mm or 5,350 mm depending on width, while the SBAL-III mainframe is 2,300 mm long with a separate decoiler. Ask us for a layout drawing before you sign a lease. Our factory layout guide has worked examples.

Working with Taokron from Serbia

  • Machines built since 1994 and supplied to 100+ countries, with 60+ patents, from an ISO 9001:2015 factory
  • CE certified
  • Wired for your three phase 50 Hz supply
  • Installation and commissioning quoted per engineer-day
  • Replies within 12 hours by email at [email protected] or on WhatsApp at +61 435 074 994

Get a Serbia-ready Taokron quotation →

FAQ

Which ductwork standards are used in Serbia?

Serbia adopts European standards as SRPS EN, and duct specifications are normally drafted on them. EN 12237 for circular ducts appears in the Serbian catalogue as SRPS EN 12237:2010, and SRPS EN 1505:2010 covers the dimensions of rectangular ducts. EN 1507 is the European standard for the strength and leakage of rectangular ducts, but we could not confirm its Serbian adoption status online, so check the Institute for Standardization of Serbia catalogue. On projects with foreign investors the design team may also name SMACNA. Always build to the documents named in the project specification.

What voltage and frequency do duct machines need in Serbia?

Serbia uses 230 V at 50 Hz. Three phase workshops are normally supplied at 400 V between phases, but please confirm the voltage measured at your workshop with your electrician. Taokron machines are listed at 380 V, 50 Hz, three phase, and we confirm the motor, drive and control wiring against your supply when we quote.

What VAT and duties apply when importing duct machinery into Serbia?

The standard Serbian VAT rate is 20%. Import VAT is paid at customs clearance, generally on the customs value plus any duty, and a Serbian VAT registered business can normally recover it, but confirm this with your accountant. Serbia is not in the EU and applies its own customs tariff. Duty depends on the machine's classification and origin, and Serbia has free trade agreements with the EU, CEFTA, EFTA, Turkey and the Eurasian Economic Union, so ask your customs broker which rate applies before you budget.

Do duct machines sold into Serbia need CE marking?

The Serbian Rulebook on the safety of machinery is aligned with Directive 2006/42/EC. The Institute for Standardization of Serbia states that the CE marking does not replace the Serbian Mark of Conformity, and that for machinery the CE marking route applies from a later date tied to the EU stabilisation agreements or accession. Marking rules can change, so ask your customs broker or a Serbian conformity body what your machine needs. Taokron machines are CE certified and ship with electrical diagrams and component lists.

Where is ductwork demand in Serbia coming from in 2026?

The main sources are the Expo 2027 complex in Belgrade, whose halls and national pavilion are due before the exhibition opens on 15 May 2027; hospital building and clinical centre reconstruction; the State Data Centre and Innovation District in Kragujevac; mixed-use and residential building around Belgrade Waterfront and Dorcol; and industrial plants in Nis and other cities. Timelines for several of these have moved, so ask each client about schedule and funding.

Which machines should a new Serbian duct shop start with?

A contractor shop making rectangular duct for offices, shops and fit-outs usually starts with a rectangular duct line or auto duct line, a Pittsburgh lockformer, a TDF flange former and a folder. Add a duct zipper and corner machines as volume grows, a spiral tubeformer when round duct becomes regular work, and a plasma table for fittings. Send your duct sizes, gauges and monthly output and a Taokron engineer will propose a machine set within 12 hours.

Duct Shop Notes

One email a month for duct shop owners

Notes on machine choices, shop layout, duct standards and new machines. Reply "unsubscribe" any time to stop.

12-hour reply

Setting up or upgrading a duct shop in Serbia? A Taokron engineer replies within 12 hours.

Ask an engineer

Engineer reply

Ask an engineer about this guide

Describe your job and what you are trying to make. Ryan Tao replies within 12 hours.

Guide: HVAC Duct Fabrication in Serbia 2026: Market, Standards and Machines

Not ready for a quote? Get the 2026 catalogue by email: 66 machines, one page each.

Machinery for this application

The duct fabrication workflows above run on standard Taokron equipment: spiral tubeformers for round duct, auto duct production lines for rectangular duct, and TDF flange and lockformer machines for closure, or browse the full machine catalog.