Roll-to-Roll Embossing Line for Appliance Panels
Coil embossing for fridge and washer panels, 0.2 to 1.2 mm, up to 1500 mm wide
Overview
What it does
A coil line for the textured outer panels of refrigerators, freezers, washing machines, air conditioners and cabinets. The coil is unwound, embossed between two rolls, leveled again to take out embossing stress, and then recoiled or cut to length and stacked. Film lamination can be added.
It runs galvanized, galvalume, pre-painted, cold-rolled and aluminium coil. Edge guiding keeps the coil tracking straight, and servo-synchronised drive with low feed tension keeps the pattern depth even without stretching the sheet.
The post-leveler keeps the panel flat and keeps the original bending ductility, so panels do not crack when they are folded later.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Film lamination
- Cut-to-length and stacking, or recoiling
- Custom patterns and logos
- Working width to your coil
What we need from you to quote
- Coil material, coating and thickness range
- Coil width and weight
- Pattern (sample panel or drawing)
- Output target
- Site power supply and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. If you need CE marking for this model, it is confirmed at quotation.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Roll-to-Roll Embossing Line for Appliance Panels
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
What thickness and width does it run?
0.2 to 1.2 mm, with most appliance panels at 0.3 to 0.8 mm. Standard widths are 1250, 1300 and 1500 mm; others are built to order.
Which patterns are available?
Orange peel, fine dot, bead dot and litchi grain as standard. Custom patterns and logos are engraved from your drawing or a sample panel.
Will pre-painted coil be damaged?
The rolls are hard-chrome plated and kept clean with a brush and air-blow unit, and the coil runs at low tension. Send a sample of your coil and we ask for a trial.
Is it CE marked?
If you need CE marking for this line, tell us and it is confirmed at quotation.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Leveling and embossing
