Automotive Heat Shield Embossing Line
Double-sided dot embossing of aluminium and stainless coil, 5 to 25 m/min
Overview
What it does
Exhaust and engine heat shields are stamped from embossed aluminium or stainless sheet. This line embosses the coil from both sides between a matched pair of rolls, giving the dot pattern used on heat shield parts.
The upper and lower rolls are geared together and phase-set at the factory, so the pattern stays in register after start-up and after a roll change. Hydraulic pressure control stores settings per material, and an optional roll pre-heater helps with 0.2 to 0.4 mm aluminium foil.
It can run alone or feed your stamping line, with cut-to-length and robot loading as options.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Cut-to-length station
- Robot loading and unloading
- Roll pre-heating for thin aluminium foil
- Link to your stamping presses
What we need from you to quote
- Material and thickness (aluminium or stainless)
- Coil width and weight
- Pattern drawing or a sample shield
- Output target
- Site power supply and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Automotive Heat Shield Embossing Line
Several machines or a complete line? Use the full inquiry form
Frequently asked questions
About this machine
What materials and thicknesses does it emboss?
Stainless steel 0.3 to 0.8 mm and aluminium 0.4 to 1.0 mm. Settings and roll surface can be adjusted for special grades.
How fast does it run?
5 to 25 m/min, depending on thickness, pattern depth and the rest of your line.
Will the top and bottom patterns stay aligned?
Yes. The paired rolls are phase-calibrated at the factory and driven through alignment gears, so the pattern does not shift after start-up or a roll change.
Can you match our heat shield pattern?
Yes. The rolls are engraved from your drawing or a sample part.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Leveling and embossing
