Coil Cut-to-Length Line, 0.5 to 6 mm
Uncoil, level, measure, cut and stack, coil up to 1600 mm and 10 t
Overview
What it does
Turns coil into flat sheet cut to length in one pass: uncoiler, feeding, multi-roll leveler, length measuring, shear and stacker.
It runs carbon steel, galvanized, stainless and aluminium coil. The leveler takes out coil set and spring-back so the sheets are ready for stamping and bending, and the servo length control keeps cut length within plus or minus 0.5 mm.
Used for appliance shells, auto parts and heat shield blanks, building sheet, door and window parts, machine housings and blanks for solar, container and elevator work. Embossing rolls can be added to emboss, level and cut in one line.
Questions before you quote?
Send photos of your parts or sheet and we come back with the right configuration.
Ask on WhatsAppOptions to discuss
- Embossing rolls in the line
- Feeding table
- Output support table
- Wider coil, heavier coil or higher speed to order
What we need from you to quote
- Coil material, thickness range, width and weight
- Sheet lengths and length tolerance you need
- Tonnes or sheets per shift
- Flying shear or stop-and-cut
- Site power supply and destination port
Supply terms
Who supplies it. Taokron. We handle the inquiry, specification review, quotation, pre-shipment inspection, shipping and after-sales support from Melbourne.
Lead time. Production time for a standard machine is 60 to 120 days. Custom rolls, a one-piece cast base, special roller sets or a complete line take longer. The exact time is confirmed at quotation.
Warranty. 12-month standard warranty on the machine.
Commissioning. Remote support included; on-site installation engineer available on request, quoted per order.
CE. CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Price. Each machine is configured to your material, thickness and width, so there is no list price. Send your details and we quote that machine.
Price request
Ask for a quotation on this machine
Send your material, thickness range, width and what the parts or sheets are for. Ryan Tao replies within 12 hours with a configuration, lead time and price. You can also send photos and drawings on WhatsApp +61 435 074 994.
Quotation for: Coil Cut-to-Length Line, 0.5 to 6 mm
Several machines or a complete line? Use the full inquiry form
Buyer guide: part leveling after laser and plasma cutting →
Frequently asked questions
About this machine
What thickness and width does it handle?
0.5 to 6.0 mm as standard, coil up to 1600 mm wide and 10 t. Thinner, thicker or wider lines are built to order.
How accurate is the cut length?
Plus or minus 0.5 mm. Real accuracy also depends on coil quality, speed and blade condition.
Can it emboss as well?
Yes. Embossing rolls can be added so one line embosses, levels and cuts to length.
Flying shear or hydraulic shear?
A servo flying shear cuts without stopping the coil, for higher output. A hydraulic shear stops to cut and suits thicker material. Tell us your thickness and output and we recommend one.
How long is delivery and what warranty do I get?
Production for a standard machine is 60 to 120 days; custom rolls, a cast base or a complete line take longer. The exact time is confirmed at quotation. The standard warranty is 12 months.
Is the machine CE marked?
CE marking is confirmed per machine on the quotation, and the CE documents are sent with it on request.
Leveling and embossing
