Who this guide is for
This guide is for a roofing maker in Ghana who buys coil and sells formed sheet to builders, hardware dealers and contractors, whether in Accra, Kumasi, Takoradi or another town, rather than a large coil-coating mill. The questions are which machines make sense, how thick your sheet is, and what to check before you order from overseas.
What the Ghanaian market asks for
Profiles. Ghanaian supplier pages and classified listings sell long-span and short-span sheet in ISL (self-lock), IBR (inverted box rib), corrugated, long tile and step tile profiles. A 2026 buyer guide on a Ghanaian news site, which is sponsored by a roofing supplier, names ISL, IBR, corrugated and long tile for aluzinc, and a Ghanaian classified page lists step tiles as a long-span option with a clay-tile look. Your own sample sheet is the reference, not a profile name, and we build the rolls to it.
Metal and gauge. Aluzinc is described as the common residential roofing sheet, sold as AZ150, which means 150 g of coating per square metre across both sides. Pure aluminium IBR is recommended for buildings near the coast. The same guide advises 0.4 mm base metal or thicker for inland homes. Listings commonly show 0.40, 0.45 and 0.50 mm. That is a commercial view, not a standard. Our trapezoidal, glazed tile, ridge cap, gutter and downpipe machines are catalogued from 0.3 mm, so these gauges sit inside the range. If you sell thinner sheet, tell us in the first message so we can check it before we quote.
Standards. The Ghana Standards Authority (GSA) is the national standards body. A 2026 GSA newsletter says the Authority has received many complaints about the quality of some roofing sheets on the market and has bought new testing instruments for metal products, including aluminium and galvanised sheet. We could not confirm which GS standard covers roofing sheet or whether a minimum thickness is mandatory. Check the current requirement directly with GSA. The machine does not decide base metal, thickness tolerance or coating. Your coil does. The machine decides cover width, rib height, straightness and cut length.
Coil supply. We could not verify how much of the coil that Ghanaian roofing makers use is bought locally and how much is imported. Ask your coil supplier for thickness, coating grade and coil width before you choose the machine.
Machines on our range and why a Ghanaian roofing maker would buy each
Every line is built to your drawing. The figures below are catalogue figures from each machine page. Final figures are confirmed on the quotation.
Trapezoidal and corrugated roof sheet machine (IBR, box profile and corrugated sheet)
This is the core machine for IBR-type box profile and corrugated sheet. One machine forms one profile, and the rolls follow the rib height, pitch and cover width of the sheet your customers already buy. It takes 0.3 to 0.8 mm material from 914, 925, 1000 or 1250 mm coil, with 18 roll stations (depends on the profile), a 5.5 kW main motor, a 3 kW hydraulic station, hydraulic post-cut and a forming speed of 10 to 20 m/min. Corrugated cover widths are 762, 838.2 or 1066.8 mm, and the trapezoidal widths are listed on the page. See the trapezoidal and corrugated roof sheet machine.
Double layer roof sheet machine
If you sell two profiles side by side, for example IBR and corrugated, this puts both on one frame with one cutting station and one control cabinet. It is catalogued for 0.3 to 1.0 mm, coil 1000 or 1250 mm, a 7.5 kW main motor, a 4 kW hydraulic station and 10 to 15 m/min. See the double layer roof sheet machine.
Glazed tile machine (step tile and long tile look)
Tile-effect sheet gives a tile look at a lower weight than clay. A hydraulic press puts in the step at each tile row, so speed is only 3 to 5 m/min. Plan output on that figure. It is catalogued for 0.3 to 0.8 mm and coil 914, 1000, 1220 or 1250 mm, with a 5.5 kW main motor and a 5.5 kW hydraulic station. See the glazed tile machine.
Ridge cap machine
A roof needs ridges and valleys as well as sheet. The machine forms round ridge, trapezoid ridge and V-valley flashing from 300, 456 or 462 mm coil, 0.3 to 0.8 mm, at 10 to 15 m/min with 12 roll stations (depends on the profile), a 4 kW main motor and a 5.5 kW hydraulic station. See the ridge cap machine.
Gutter and downpipe machines (add-ons)
A roof sheet shop can add gutter and downpipe from the same coil stock. The gutter machine takes 247, 303, 635 or 645 mm strip at 12 to 15 m/min with 19 roll stations (depends on the profile). The downpipe machine takes 180, 300 or 342 mm strip at 8 to 10 m/min with 18 roll stations (depends on the profile). Both are catalogued for 0.3 to 0.8 mm with a 5.5 kW main motor and a 4 kW hydraulic station. See the gutter machine and the downpipe machine.
C/Z purlin machine (add-on)
Steel-frame buildings carry roof sheet on purlins, so a sheet shop can sell both. The machine makes C, Z and U purlins in 1.5 to 3 mm steel, web 100 to 300 mm, flange 40 to 80 mm and lip 15 to 20 mm, with 16 roll stations (depends on the profile), an 18.5 kW main motor and an 11 kW hydraulic station. It is the heaviest machine here, so check your supply and generator size first. See the C/Z/U purlin machine and our purlin buyer guide.
Decoiler and slitting line
A hydraulic decoiler holds the coil and feeds the line, and it is sized to your coil weight, inner diameter and width. See the hydraulic decoiler. If you buy wide coil and want to cut your own strip for ridge cap or gutter, the slitting and cut-to-length line is catalogued for 0.5 to 1.5 mm and coil 1250 to 1500 mm at 8 to 10 m/min.
Check metal and thickness before anything else
Our catalogue lists a thickness range, not a metal list. Aluzinc, galvanized steel, pre-painted coil and pure aluminium behave differently in the rolls. Tell us the metal, grade, coating, temper and exact thickness in your first message. We check them before we quote.
Power, import taxes and delivery
- Power: reference sources list Ghanaian mains as 230 V at 50 Hz. We did not find a reliable source for three-phase 400 V at industrial sites, so measure at your workshop and send us voltage, phase and frequency. Press reports describe outages in 2025 and 2026, so ask yourself how the line will run on a generator. If your site runs on a generator, tell us its size, and size it for the hydraulic pump and largest motor, not just the running load.
- VAT and levies: Ghana's VAT Act 2025 took effect on 1 January 2026 with a unified 15% rate. The NHIL and GETFund levies remain at 2.5% each, and an EY summary notes that their cascading effect appears to continue on imported goods. We have not confirmed how these apply to a machine, so ask your clearing agent or accountant.
- Import duty: duty follows the ECOWAS Common External Tariff, which has five bands from 0% to 35%. Most sources we found place capital goods in the 5% band, but one gives 10%, and the band depends on the tariff classification. Check with your clearing agent before you sign.
- Port: most containerised cargo for Ghana arrives at Tema, which GPHA statistics reported in 2025 as handling more than 95% of national container traffic. Tell us your port and we quote shipping to it.
- Delivery: about 60 working days from drawing approval and deposit, then sea freight to the port you name.
What we need from you to quote
- A sample sheet piece measured with a tape, or a profile drawing with dimensions
- Metal, coating, grade and thickness in millimetres
- Coil width and coil weight you buy
- Sheet lengths you cut and rough daily output
- Whether you also want ridge cap, C/Z purlin, gutter or downpipe
- Site power supply (voltage, phase, frequency), generator size if any, and destination port
Send your roofing sheet profile for a quote in 12 hours →
Taokron roll forming machines are built to your drawing. Taokron (Melbourne) handles drawing review, quotation, pre-shipment inspection, shipping and after-sales support. Lead time is about 60 working days from drawing approval and deposit. Warranty is 12 months from commissioning, with remote video support included and an on-site installation engineer available on request, quoted per order. Since 1994 our team has supplied machines to buyers in 100+ countries. Similar buyer guides for other African markets are the Kenya roof sheet guide, the Nigeria roofing sheet guide and the Tanzania roofing sheet guide. All our roofing lines are listed in the roll forming range.
FAQ
Which roofing sheet profiles do Ghanaian customers ask for?
Supplier pages and buyer guides in Ghana name ISL (self-lock), IBR (inverted box rib), corrugated, long tile and step tile, in aluzinc, pre-painted and pure aluminium. Profile names are not drawings, so send a sample piece or a dimensioned drawing and we build the rolls to that.
Can the machine make 0.4 and 0.5 mm sheet?
Yes, both sit inside the range. The Taokron trapezoidal and corrugated machine is catalogued for 0.3 to 0.8 mm. Ghanaian listings commonly show 0.40, 0.45 and 0.50 mm, and one buyer guide advises at least 0.4 mm base metal with an AZ150 coating for inland homes. Tell us the metal, coating and exact thickness before we quote.
Does the machine make my sheet comply with Ghana Standards Authority requirements?
No. Base metal, thickness tolerance and coating come from your coil, not from the machine. The machine controls cover width, rib height, straightness and cut length. We could not confirm which GS standard or minimum gauge applies to roofing sheet, so ask the Ghana Standards Authority and your coil supplier directly.
What power supply do I need to tell you about?
Reference sources list Ghanaian mains as 230 V at 50 Hz. We did not find a reliable source for three-phase 400 V at industrial sites, so measure at your workshop and send us voltage, phase, frequency and any generator size, so the motors and cabinet are matched to it.
What import taxes apply to a roll forming machine in Ghana?
Ghana's VAT Act 2025 took effect on 1 January 2026 with VAT at 15%, and NHIL and GETFund levies of 2.5% each remain. Duty follows the ECOWAS Common External Tariff, which has bands from 0% to 35%. We have not confirmed the total for roll forming machines, so ask your clearing agent to confirm the classification and the landed taxes before you sign.
Duct Shop Notes
One email a month for duct shop owners
Notes on machine choices, shop layout, duct standards and new machines. Reply "unsubscribe" any time to stop.
Thanks, you are subscribed. The first email arrives next month.